2. Cell2
  3. 02180151
02180151

Cell2 02180151 User manual

  • Hello, I've reviewed the user manual for the Windshield Shroud Kit 86-M5910-0311.0. This document provides clear instructions on how to install the kit, and it highlights the adjustable angle feature of the lighthead as well as some other mounting and wiring instructions. I am ready to answer any questions you have about the installation or features of this device.
  • What is the maximum adjustable angle of the lighthead?
    How long should the assembly be pressed against the windshield during installation?
    What should be used to clean the mounting area of the windshield?
High Gradient Windshield Shroud Kit MANUAL
86-M5910-0311.0
INSTALLATION
1. Assemble the lighthead to the plastic shroud with the rubber backing.
2. Adjust the angle of the lighthead before fixing it with the provided machine screws (ensure that they are on the same level).
3. Choose a mounting area on the windshield that is clear from obstruction to view or interference with driving.
4. Clean the mounting area thoroughly with alcohol and remove tape backings before mounting.
5. Press the assembly firmly againest the windshield for 1 minute to complete the installation.
6. Make wiring according to the lighthead manual.
OR
NOTE: Lightheads may be oriented with cable exiting
to the left or to the right of the rear shroud.
Lightheads
Rubber Backing
Shroud
Self-adhesive Tape
Self-adhesive Tape
Foam Pad
Foam Pad
Machine Screw
Machine Screw
CAUTION:
Recommended torque
force @ 1.5~2.5Kgf-cm
ADJUSTABLE ANGLE
The angle of lighthead is adjustable with 55 degree
at most for optimum warning efficiency.
Horizontal marking that indicates level of adjustment.
35°
90°
/