![](//vs1.manuzoid.com/store/data-gzf/8bc0d3dbe1d94b25a02644a3340ddc58/2/002220630.htmlex.zip/bg1.jpg)
© 2021 Q-T
ran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 |
[email protected] | www
.q-tran.com
Specification subject to change.
Rev-08-05-21INSTALLATION Q-CAP Flexible Fixtures: WURM
1.
2. 3.
12"
.07"
WHITE SNUG CLIP SMALL
1.
2. 3.
12"
MAGNETIC CLIP SMALL
Attach clips to fixture matching magnet distances. Align and snap fixture to magnetic rings.
Align fixture to white snug clips matching distances. Press fixture into white snug clips.
Mount white snug clip with provided flat head screw.
Install magnet rings with provided flat head screw.
.31"
.63"
.28"
.63"
#6x5/8" Flat head screw
#6x5/8" Flat head screw
NOTE: White snug clip should be placed every 12"
NOTE: Magnetic clip should be placed every 12"
INCLUDED HARDWARE
INCLUDED HARDWARE
.70”
.75”
.75”