2. Q-tran
  3. Q-TRAN FLUR Surface Flanged Extrusion
Q-TRAN FLUR Surface Flanged Extrusion

Q-tran Q-TRAN FLUR Surface Flanged Extrusion, FLUR Surface Flanged Extrusion Installation guide

  • Hello! I've reviewed the installation instructions for the FLUR linear fixture. This document provides details on various mounting methods, including screw, 832 silicone, and VHB. I'm ready to answer any questions you have about the mounting process or the specifications mentioned in the document.
  • How many clips are provided for fixtures 4' or less?
    How many clips are provided for fixtures greater than 4'?
    What should you consider when using 832 Silicone?
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-02-23-22
INSTALLATION Linear Fixtures - FLUR
Mounting
NOTE:
832 Silicone use in a well- ventilated area, 832 Silicone sold with Caulking gun. Do not use in any submersible applications.
832 Silicone Mounting
VHB Mounting
Screw Mounting
NOTE: 2 clips provided for 4’ or less;
4 clips provided for greater than 4’
NOTES:
• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
3.
24" - 30"
1. 2.
3.
2.
20
MINS
24" - 30"
1.
832
3.
2.
1.
.20
"
.81"
1.25"
Stainless Steel Clip
(SST-01)
/