INSTALLATION LED POWER SUPPLY - QZ-DMX
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-05-12-22
1 32 4
QZ Components
Driver Compartment Wiring Compartment Mounting Tab Slots Mounting Tab Holes
3
2
1
4
TOP VIEW
DRIVER COMPARTMENT
WIRING COMPARTMENT
INSTALLATION LED POWER SUPPLY - QZ-DMX
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-05-12-22
Required Hardware
Mounting
Mounting Foot:
#6 Flat head screw
The QZ must be mounted into a stud for sufficient support, using either the center holes or the slots of each mounting tab
2
SIDE SLOTS
SIDE SLOTS
96W
CENTER HOLE
CENTER HOLE
The QZ-Non Dim can be mounted either vertically or horizontally, utilizing the supplied screws and the mounting tabs on
the bottom of the enclosure
1
0.262
"
0.75"
2.9"
3.6"
4.9"
1.8"
3.1"
INSTALLATION LED POWER SUPPLY - QZ-DMX
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-05-12-22
When installing multiple QZ power supplies, seperate the enclosures by 3” of space from edge to edge. This prevents the
rise of ambient temperature between the power supplies.
3
3.0" 3.0”
3.0”
Horizontal mount illustrated above Vertical mount illustrated above
INSTALLATION LED POWER SUPPLY - QZ-DMX
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-05-12-22
Wiring diagram
4
96W
LED
GND
HOT
NEU
96W, 1 CHANNEL
_
+
GND
D+
D
_
DMX Controller
AC INPUT OUTPUT
DMX
+
GND
HOT
NEU
Cool
_
Warm
_
96W
LED
96W, 2 CHANNEL
GND
D+
D
_
DMX Controller
AC INPUT OUTPUT
DMX
+
GND
HOT
NEU
_
_
_
B
G
R
96W
LED
96W, 3 CHANNEL
GND
D+
D
_
DMX Controller
AC INPUT OUTPUT
DMX
+
_
_
_
B
G
R
_
W
GND
HOT
NEU
96W
LED
96W, 4 CHANNEL
GND
D+
D
_
DMX Controller
AC INPUT OUTPUT
DMX
Wiring from power supply to light fixture must be single multiconductor cable
INSTALLATION LED POWER SUPPLY - QZ-DMX
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-05-12-22
1.8"
3.1"
9.5"
3.6"
.36"
TOP VIEW
WIRING COMPARTMENT
DRIVER COMPARTMENT
8.60"
WIRIN G COMPARTMENT VIEW
Ø.87"
4.90"
1.58"
DRIVER COMPA RT M ENT
WIRING COMPA RT MENT
WIRING COMPARTMENT VIEW
TOP VIEW
QZ-DMX 96W
-
1
-
2
-
3
-
4
-
5
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
TRAN LED ROND Installation guide
-
TRAN LED ARKA Installation guide
-
TRAN LED Tela Installation guide
-
TRAN LED Extrusion Wide Installation guide
-
TRAN LED Power Supply Installation guide
-
TRAN LED WALA-DW Q-CAP Flexible Fixtures User manual
-
TRAN LED Vers Installation guide
-
TRAN LED Flex Installation guide
-
TRAN LED LINEAR LED Strip User manual
-
TRAN LED DRY, DMP, WET Linear LED Strip User manual
Other documents
-
Q-tran Q-TRAN QZ-STICK-PH-0-10V LED Power Supply Installation guide
-
Q-tran Q-TRAN TRE3 Three Sided Lens LED Aluminum Extrusion Installation guide
-
Q-tran MICRO 5 Mini LED Fixture Installation guide
-
Q-tran Q-TRAN QZ-ND Compact LED Drivers Installation guide
-
Q-tran Q-TRAN Wide Linear Fixtures Installation guide
-
Q-tran Q-TRAN FLUR Surface Flanged Extrusion Installation guide
-
Q-tran DMX-US3 Controller for LED Lighting Installation guide
-
Q-tran QUAVO Linear Fixture User manual
-
Q-tran Q-TRAN QZLP LED Power Supply User manual
-
WarmlyYours Qtran Transformer Installation guide
