TRAN LED VEVE Installation guide

Brand: TRAN LED

Model: VEVE

Type: Installation guide

© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Speciﬁcation subject to change. Rev-02-23-22

INSTALLATION Linear Fixtures - VEVE

NOTES:

• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void

Mounting

NOTE: 2 clips provided for 4’ or less;

4 clips provided for greater than 4’

.20

"

.81"

1.25"

1.25"

.20

"

.20

"

.81"

Stainless Steel Clip

(SST-01)

Magnet Clip

(MG-01)

HARDWARE

#6x5/8" Flat head screw

(Included)

#4x5/8" Flat head screw

(Included)

12"

.75"

.23"

2.5"

.64"

.26

"

.625"

.21

"

.625"

Magnet Mount Accessory

(MMA)

(Sold separately)

NOTE:

Apply silicone in a well ventilated area. 832 Silicone is sold with caulking gun. Do not use in any submersible applications.

NOTE:

The magnet clips should be offset to the flat heads used to secure the bracket, to maximize magnetic connection

.

Using the #6 Flat head screws, mount two screws into the 12”

magnet bracket through the slotted holes at each end

Attach the magnet clips onto the extrusion Connect the assembled extrusion and its magnet clips to the magnet

bracket, the install should match the section view

VHB Mounting

832 Silicone Mounting

Magnet Mounting

Screw Mounting

#4x5/8"

Flat head screw

#6x5/8"

Flat head screw

.21

"

.625"

.26

"

.625"

3.

1.

24" - 30"

2.

3.

1. 2.

Section View

3.

2.

20

MINS

24" - 30"

1.

832

3.

2.

1.

1

TRAN LED VEVE Installation guide

Brand: TRAN LED

Model: VEVE

Type: Installation guide

Related papers

Other documents