TRAN LED Power Supply Installation guide

Type
Installation guide

TRAN LED Power Supply: Unleash a World of Colorful Illumination

Transform your outdoor spaces into mesmerizing spectacles with the TRAN LED Power Supply, the ultimate solution for powering and controlling your LED lighting systems. This versatile power supply is designed to provide reliable and efficient operation, ensuring your LED lights shine brighter and last longer. With its advanced features and user-friendly design, the TRAN LED Power Supply is the perfect choice for both residential and commercial applications.

TRAN LED Power Supply: Unleash a World of Colorful Illumination

Transform your outdoor spaces into mesmerizing spectacles with the TRAN LED Power Supply, the ultimate solution for powering and controlling your LED lighting systems. This versatile power supply is designed to provide reliable and efficient operation, ensuring your LED lights shine brighter and last longer. With its advanced features and user-friendly design, the TRAN LED Power Supply is the perfect choice for both residential and commercial applications.

INSTALLATION LED POWER SUPPLY - QOM-eLED+DMX-PS
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-07-12-22
Mounting Options
Housing
BOTTOM VIEW
ISOMETRIC VIEW
1.36" KNOCKOUT 4X
(FOR 1" FITTINGS)
1.07" KNOCKOUT 5X
(FOR 3/4" FITTINGS)
4.90"
14.5"
15.4"
9.22" 4.90"
NOTE: To order additional lengths of wire for connection in the secondary
Please call factory for availability.
: QOM must be installed as shown.
Pole Mount
Surface Wall Mount
2.00"
0.25"
1/4”x2” wood screw or
LAG bolt recommened
1.82"
3.38"
3.14"
INSTALLATION LED POWER SUPPLY - QOM-eLED+DMX-PS
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-07-12-22
Wiring Installation
QOM-eLED+DMX
: for exterior
Blue Wire = Blue LED
Red Wire = Red LED
Green Wire = Green LED
White Wire = White LED
Black Wire = +24V
A C
LED DRIVER 2
(120 - 277V)
B
LED DRIVER 2
(120 - 277V)
LED DRIVER 2
(120 - 277V)
B
M
-
+
M
-
+
M
-
+
SECONDARY
PRIMARY
DMX Shield
DMX -
DMX +
NEU
GND
HOT
GND
HOT
NEU
A B C
DMX IN DMX OUT
A B C
GND
DMX +
DMX -
Red
Blue
Green
To next
power supply
LED LED LED
R G B W+24 R G B W+24 R G B W+24
M
-
+
LED
Blue = Blue
White = White
Green = Green
Red = Red
Black = +24V
R G B W +24V
INSTALLATION LED POWER SUPPLY - QOM-eLED+DMX-PS
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-07-12-22
Swimming Pool Installation
Fundamental Construction
REGULATIONS
In accordance with the requirements of NEC680 regulation in the United States, when an illumination light is installed in the swimming pool, the distance from the bottom of
the terminal box to the ground shall be no less than 4 inches. The vertical distance to the water surface of the swimming shall not be less than 8 inches, and the horizontal
distance to the water edge of the swimming pool shall not be less than 48 inches.
REQUIREMENT FOR POWER SUPPY
Please use only an isolating low voltage power supply with ungrounded output, evaluated for swimming pool use.
All the fundamental constructions, including the installation of junction box and switch, cable bushing and laying, the digging of slots, etc.,
should be done before the light installation.
Pool Spa Waterproof Junction Box
Corrosion
Resistant Conduit
8 in. Min. Bottom of
J-box to Top of Water Lin
e
48 in. Min. J-Box
to Edge of Pool
Seal Conduit Entry with
Pool-grade Silicone Sealant
To Class 2 LED Driver,
GFCI, &Circuit Breaker
4 in. Min.
For swimming pool, the embedded installation is strongly suggested so as to secure the swimmers'
safety and avoid the damage to lights, so a slot for implanting profiles should be prepared on mountin
g
surface first, suggested slot sizes: 0.95” in width, 0.98” in depth.
0.98”
0.95”
INSTALLATION LED POWER SUPPLY - QOM-eLED+DMX-PS
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-07-12-22
CSA Requirements
Power unit for use with Fountain, Swimming Pool, and Spa Luminaires
Suitable for indoor and outdoor use
This power supply must be installed according to the National Electric Code and local codes and ordinances and in
accordance with applicable installation code by a person familiar with the construction and operation of the product and
the hazards involved.
Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.
To avoid a hazard to children, account for all parts and destroy all packaging materials.
Keep enclosure cover covered.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

TRAN LED Power Supply Installation guide

Type
Installation guide

TRAN LED Power Supply: Unleash a World of Colorful Illumination

Transform your outdoor spaces into mesmerizing spectacles with the TRAN LED Power Supply, the ultimate solution for powering and controlling your LED lighting systems. This versatile power supply is designed to provide reliable and efficient operation, ensuring your LED lights shine brighter and last longer. With its advanced features and user-friendly design, the TRAN LED Power Supply is the perfect choice for both residential and commercial applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI