Q-tran QUAVO Linear Fixture User manual

QUAVO Linear Fixture
Brand
Q-tran
Model
QUAVO Linear Fixture
Category
Wall & ceiling mounts accessories
Type
User manual

This manual is also suitable for

Q-Tran Q-TRAN QUAVO Linear Fixture is a versatile and stylish lighting solution for various indoor applications. With its sleek design and knife-edge cove mount, it seamlessly integrates into modern architectural settings. The fixture operates on a 24VDC power supply and is compatible with Q-Tran power supplies. Installation is simplified with mounting clips and magnet clips, providing secure and flexible mounting options. The QUAVO-STANDARD method enables cove mounting, allowing for a clean and contemporary look.

Q-Tran Q-TRAN QUAVO Linear Fixture is a versatile and stylish lighting solution for various indoor applications. With its sleek design and knife-edge cove mount, it seamlessly integrates into modern architectural settings. The fixture operates on a 24VDC power supply and is compatible with Q-Tran power supplies. Installation is simplified with mounting clips and magnet clips, providing secure and flexible mounting options. The QUAVO-STANDARD method enables cove mounting, allowing for a clean and contemporary look.

COMPLIANT 5YEAR
WARRANTY
INSTALLATION INSTRUCTIONS
LINEAR FIXTURE - QUOVA - STANDARD
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22 1
QUOVA-STANDARD
INSTALLATION INSTRUCTIONS
LINEAR FIXTURE - QUOVA - STANDARD
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22 22© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22
METHODS OF INSTALLATION
THIN WIDE ROND TORQ
Quova-Standard
WALL
WALL
FLOOR
CEILING
3.20"
1.06"
1.88"
Compatible Fixtures
LALO ARKA VEVE
OPTI VERS
TELA
0.57"
1.00"
.64"
.88"
Cove Mounting Method
• OUOVA-STANDARD (page 4-6)
ATTENTION: Please read all instructions BEFORE installation
• Product to be installed by a licensed electrician - Field modifications void warranty
• Use only with Class 2 power supply unit — Compatible for use with Q-Tran power supplies
• Knife edge cove mount
• Input Voltage: 24VDC
• Diagrams for representation only and not to scale.
COMPONENTS &
HARDWARE
METHODS &
INSTALLATIONS MOUNTING
INSTALLATION INSTRUCTIONS
LINEAR FIXTURE - QUOVA - STANDARD
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22 33© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22
COMPONENTS & HARDWARE
NOTES:
STAINLESS STEEL CLIP MAGNET CLIP
• 2 clips provided for 4’ or less; 4 clips provided for greater than 4’ • One magnet clip per foot
• MMA-01/MMA-02 comes in 12” pieces; use at least one clip per MMA accessory
• MMA-01/MMA-02 can be cut into smaller pieces, if desired
STAINLESS STEEL CLIP
MAGNET CLIP
SST-01 CC-01
.20
"
.81"
1.25"
1.25”
.7”
.18”
MG-01 MG-02
1.25"
.20
"
.20
"
.81"
.21
"
.188"
Included
Stainless Steel
Phillip
#4-40 - X 3/16”
3.20"
1.06"
1.88"
MAGNET MOUNT ACCESSORY
sold individually
MMA-01
Included
• 2 #6x5/8”
Flat Head SS
12"
.75"
.23"
2.5"
.64"
MMA-02
Included
• 2 #6x5/8”
Flat Head SS
1.86”
12”
.64”
.58”
ACCESSORIES SOLD SEPARATELY
2
3
A
B
4
1
5
6
CORNER
Outside Inside
QUOVA-STANDARD
3.13”
A - Fixture Housing
B - Lighting Module
1 - Inside and Outside Corners.
2 - Fixture Mounting Channel.
3 - Mounting Screws, by Others.
4 - Fixture Housing Extrusion - Anodized Aluminum - surface
treated to accept paint. Provided in 8ft nominal lengths.
Field cut final piece in linear run to desired length.
5 - End Cap - Used to close the end of the fixture housing
extrusion. Not required when the fixture housing extrusion
ends in a corner or against a wall. Available in Left and
Right Configurations.
6 - Inline Bracket; Designed to align and hold sections of fixture
housing together.
COMPONENTS &
HARDWARE
METHODS &
INSTALLATIONS MOUNTING
INSTALLATION INSTRUCTIONS
LINEAR FIXTURE - QUOVA - STANDARD
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22 44© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22
COMPONENTS &
HARDWARE
SURFACE MOUNTING METHOD
SURFACE PREPARATION
Temperature and environmental concerns:
• Ideal application environment is 70-100ºF in 50% humidity
or less.
• Minimum application temperature: 50ºF
• This temperature and humidity should be maintained for
72 hours after application for maximum bond strength.
50% humidity
or less
70-100ºF 72 hrs
METHODS &
INSTALLATIONS MOUNTING
INSTALLATION INSTRUCTIONS
LINEAR FIXTURE - QUOVA - STANDARD
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22 55© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22
a: Pre-drill 1/4” pilot holes every 16” to align with studs start
with corners and fill in with straight sections..
b: Align QUOVA to be level, and if necessary, to line up with
ceiling/soffit.
c: Mount QUOVA to wall with #6 screws (by others) every 16”
into studs.
a: If multiple lengths are being used, install the inline bracket.
b: Install inline bracket in mounted piece.
c: Follow Instructions of step 1 for second length.
d: Confirm both pieces are level and aligned, mount second
piece, slide inline bracket over and tighten set screws.
e: Repeat for additional lengths as needed.
Install the endcap on the appropriate side and tighten set
screw and repeat on the other side.
a: Determine wire feed location.
b: Drill 1/4” Hole through QUOVA and drywall.
COVE MOUNTING METHOD: QUOVA-STANDARD
LEFT
Front View
ISO View
Front View
ISO View
RIGHT
1
16"
21
3 4
2
a
b
COMPONENTS &
HARDWARE
METHODS &
INSTALLATIONS MOUNTING
Corner
16"
Corner
INSTALLATION INSTRUCTIONS
LINEAR FIXTURE - QUOVA - STANDARD
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22 66© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-11-23-22
a: Apply joint compound to wall and underneath.
b: Allow to dry.
c: Sand and repeat as necessary.
d: Once completed, apply primer and paint.
Use drywall tape at joint of QUOVA to wall and underneath.
a: Install mounting clips in screw track.
a&b: Mount Lighting fixture inside of QUOVA. Run wire through
pre-drilled hole back to power supply or junction box.
QUOVA Standard Install Assembly.
COVE MOUNTING METHOD: QUOVA-STANDARD
Dry wall Tape
Bottom View
ISO-Top View
5
7 8
6
Joint Compound
COMPONENTS &
HARDWARE
METHODS &
INSTALLATIONS MOUNTING
With Mounting
Clip installed
With MMA
installed
With MMA
installed
With Mounting
Clip installed
a
b
b
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Q-tran QUAVO Linear Fixture User manual

QUAVO Linear Fixture
Brand
Q-tran
Model
QUAVO Linear Fixture
Category
Wall & ceiling mounts accessories
Type
User manual
This manual is also suitable for

Q-Tran Q-TRAN QUAVO Linear Fixture is a versatile and stylish lighting solution for various indoor applications. With its sleek design and knife-edge cove mount, it seamlessly integrates into modern architectural settings. The fixture operates on a 24VDC power supply and is compatible with Q-Tran power supplies. Installation is simplified with mounting clips and magnet clips, providing secure and flexible mounting options. The QUAVO-STANDARD method enables cove mounting, allowing for a clean and contemporary look.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents