2. TRAN LED
  3. WURM
WURM

TRAN LED WURM Installation guide

  • I've reviewed the installation instructions for the Q-Tran WURM Flexible Fixtures. This document outlines the steps for mounting the fixtures using either white snug clips or magnetic clips, specifying that clips should be placed every 12 inches. I'm ready to help with any questions you have about this document.
  • How often should white snug clips be placed?
    How often should magnetic clips be placed?
    What type of screw is used for mounting the clips?
© 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-08-05-21
INSTALLATION Q-CAP Flexible Fixtures: WURM
1.
2. 3.
12"
.07"
WHITE SNUG CLIP SMALL
1.
2. 3.
12"
MAGNETIC CLIP SMALL
Attach clips to fixture matching magnet distances. Align and snap fixture to magnetic rings.
Align fixture to white snug clips matching distances. Press fixture into white snug clips.
Mount white snug clip with provided flat head screw.
Install magnet rings with provided flat head screw.
.31"
.63"
.28"
.63"
#6x5/8" Flat head screw
#6x5/8" Flat head screw
NOTE: White snug clip should be placed every 12"
NOTE: Magnetic clip should be placed every 12"
INCLUDED HARDWARE
INCLUDED HARDWARE
.32”
.70”
.75”
.32”
.70”
.75”
/