2. TRAN LED
  3. Extrusion Wide

TRAN LED Extrusion Wide Installation guide

  • Hello! I have reviewed the provided installation guide for Q-Tran's Extrusion WIDE. The document outlines three different mounting methods - screw, 832 silicone, and VHB mounting and the different clips needed depending on the length of the extrusion. I am ready to assist with any questions you may have about the installation process.
  • How many clips are provided for extrusions 4' or less?
    How many clips are provided for extrusions greater than 4'?
    Can I use 832 Silicone in any submersible applications?
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-05-23-22
INSTALLATION EXTRUSION - WIDE
Mounting
NOTE:
832 Silicone use in a well- ventilated area, 832 Silicone sold with Caulking gun. Do not use in any submersible applications.
832 Silicone Mounting
VHB Mounting
Screw Mounting
NOTE: 2 clips provided for 4’ or less;
4 clips provided for greater than 4’
NOTES:
• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
.47”
1.03”
.56”
3.
1.
24" - 30"
2.
3.
20
MINS
2.
24" - 30"
1.
832
3.
2.
1.
Stainless Steel Clip
(SST-09)
Plastic Clip
(PLC-03)
.97"
1.01"
.50"
/