Allen-Bradley 193-CT-UL-600A Installation guide

Brand: Allen-Bradley

Model: 193-CT-UL-600A

Type: Installation guide

This manual is also suitable for

Installation Instructions

Overload Current Transformers

(Cat 193-CT-CE )

WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.

Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of malfunction or

damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.

Cat 193-CT-CE-300A 193-CT-CE-400A

INSULATION LEVEL

600 V; BIL 10kV full wave

FREQUENCY

50-400 Hz.

RATING FACTOR

1.33 @ 30 deg. C ambient

OUTER ENCAPSULATION

Plastic Cased

TERMINALS

Brass studs No 8-32 UNC with one flat washer,

lockwasher and regular nut.

APPROX. WEIGHT

0.5 lbs.

Catalog Number

Current

Ratio

Accuracy

(60 Hz)

Burden VA

300:5A

± 1 %

1.5

400:5A

± 1 %

1.5

193-CT-CE-400A

193-CT-CE-300A

193-CT-CE-400A

193-CT-CE-300A

IEC 61869 1+2

PN-466637

*PN-466637*

DIR 10003395618 (Version 00)

Publication 193-IN079A-EN-E- November 2017

Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.

Wiring Diagram

OVER LOAD

RELAY

T1 T2 T3

L2 L3

K-P1

L-P2 L-P2 L-P2

S1/K S1/K S1/K

S2/I S2/I S2/I

CT1

CT2

CT3