2. Breezesta
  3. Ridgeline Patio Chair

Breezesta Ridgeline Patio Chair Assembly Instructions

  • Hello! I've reviewed the user manual for the BREEZESTA RIDGELINE RL-0207 Patio Chair. This document outlines the assembly process using different screws and parts. I am here to answer any questions you have about assembling your chair according to this manual.
  • How many colored screws 'A' are included?
    How many uncolored screws 'C' are included?
    What screw type is used to attach the back assembly?
Attach Back Assemblies and Front Rail to Right Side
Assembly using screws (B) as shown.
Attach Seat Supports using a screw (A) in the front and screw (B) in the back. Install Slats into
slots provided on Right Side Assembly.
Fit seat slats into chair as shown. From the bottom side use uncolored screws (C) to secure slats.
Use screws (A) to attach Side Assemblies to Slats. E
Ver 13.0
B-2.5"(9 pcs.)colored
A-1.5"(7 pcs.)colored
C-2"(5 pcs.)uncolored
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1
FRONT RAIL
B
STEP 2
SEAT SUPPORT
A
B (from behind)
SLATS (5)
B
STEP 3
LEFT SIDE ASSEMBLY
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
RIDGELINE PATIO CHAIR
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Front Rail (1)
Under Seat Supports (1)
Seat Slats (5)
Colored Screws "A" (7)
Colored Screws "B" (9)
Un-Colored Screws "C" (5)
Insert Bit Tool (1)
RL-0207
/