Breezesta Skyline Double High Back Rocker Assembly Instructions

  • Hello! I am an AI chatbot trained to assist you with the Breezesta Skyline Double High Back Rocker Assembly Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Attach Side Assemblies to Back Assemblies using screws (B)
as shown.
Attach Front Rail using screws (B) with the metal support to the inside. Place Seat Supports in place and
screw through Back Assembly with screws (B) and through front rail with screws (A).
Attach Left Side Assembly as shown using screws (B). Fit seat slats into bench as shown. From
the bottom side use uncolored screws (C) to secure slats. Use screws (A) to attach Side
Assemblies to Slats. Attach Rocker to bottom with screws (D). G
Ver 13.0
B-2.5"(10 pcs.)colored
A-1.5"(8 pcs.)colored
C-2"(10 pcs.)uncolored
D-3"(4 pcs.) uncolored
B
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1 LEFT SIDE ASSEMBLY
STEP 2
FRONT RAIL
B
A
B (from behind)
B
STEP 3
Place one end into
slot and bend slat
slightly to fit into
other end.
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
SKYLINE DOUBLE HIGHBACK ROCKER
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Front Rail (1)
Under Seat Supports (2)
Seat Slats (5)
Rockers (2)
Colored Screws "A" (8)
Colored Screws "B" (10)
Un-Colored Screws "C" (10)
Un-Colored Screw "D" (4)
Insert Bit Tool (1)
SK-0403
/