2. Breezesta
  3. Skyline Park Bench

Breezesta Skyline Park Bench Assembly Instructions

  • Hello! I've reviewed the user manual for the BREEZESTA Skyline SK-0406 Park Bench. This document provides step-by-step instructions for assembling the bench, including details on the required hardware and parts. I'm ready to answer any questions you might have about assembling this product.
  • What types of screws are used in the assembly?
    How many seat supports are needed for the 48" bench?
    How do I secure the seat slats?
Attach Side Assemblies to Back Assemblies using screws (B)
as shown.
Attach Front Rail using screws (B) with the metal support to the inside. Place Seat Supports in
place and screw through Back Assembly with screws (B) and through front rail with screws (A).
Fit seat slats into bench as shown. From the bottom side use uncolored screws (C) to secure
slats. Use screws (A) to attach Side Assemblies to Slats.
OFO
Ver 13.0
B-2.5"colored
A-1.5"colored
C-2"uncolored
B
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1 LEFT SIDE ASSEMBLY
STEP 2
FRONT RAIL
SEAT SUPPORTS
36" BENCH (1)
48" BENCH (2)
60" BENCH (3)
B
A
B (from behind)
B
STEP 3
Place one end into
slot and bend slat
slightly to fit into
other end.
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
SKYLINE PARK BENCH
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Front Rail (1)
Seat Supports (see chart)
Seat Slats (5)
Hardware (see chart)
Insert Bit Tool (1)
Screw "C"
Screw "B"
Screw "A"
15 5 11 9 9 8
7 10
10
Bench Size
Seat Supports 3 2
1 60"48"36"
/