2. Breezesta
  3. Skyline Rocking Bench

Breezesta Skyline Rocking Bench Assembly Instructions

  • Hello! I've reviewed the user manual for the Breezesta Skyline SK-0404 Rocking Bench. This document details the assembly process, provides a parts list, and specifies the types of screws needed. I am ready to answer any questions you might have about assembling this rocking bench!
  • What does screw A look like?
    What does screw B look like?
    What does screw C look like?
    What does screw D look like?
Attach Side Assemblies to Back Assemblies using screws (B)
as shown.
Attach Front Rail using screws (B) with the metal support to the inside. Place Seat Supports in
place and screw through Back Assembly with screws (B) and through front rail with screws (A).
Fit seat slats into bench as shown. From the bottom side use uncolored screws (C) to secure
slats. Use screws (A) to attach Side Assemblies to Slats. Attach Rockers with screw (D) from
bottom.
O F O
Ver 13.0
D-3"uncolored
C-2"uncolored
A-1.5"colored
B-2.5"colored
B
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1 LEFT SIDE ASSEMBLY
STEP 2
FRONT RAIL
SEAT SUPPORTS
36" BENCH (1)
48" BENCH (2)
60" BENCH (3)
B
A
B (from behind)
B
STEP 3
Place one end into
slot and bend slat
slightly to fit into
other end.
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
SKYLINE ROCKING BENCH
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Front Rail (1)
Seat Supports (see chart)
Seat Slats (5)
Rockers (2)
Hardware (see chart)
Insert Bit Tool (1)
Seat Supports
Bench Size
Screw "A"
Screw "B"
Screw "C"
60"
11
15
36"48"
1 2 3
10
10
7 8 9
9
5
Screw "D" 4 4 4
/