2. Breezesta
  3. Horizon backless Bench

Breezesta Horizon backless Bench Assembly Instructions

  • Hello! I've reviewed the instructions for the BREEZESTA Horizon HZ-0309 bench. This document provides a step-by-step guide on how to assemble the bench, it also contains parts and hardware chart for different sizes of benches. I am ready to answer any questions you have about assembling this backless bench.
  • How many seat supports are needed for a 48" bench?
    What type of screw is used to attach the side assemblies to the rail assembly?
    What is the length of screw type 'A'?
Attached Side Assemblies to Rail Assembly using screws (B)
as shown.
Place Seat Supports in place and using screws (A), attach the Rails as shown in the drawing
Fit seat slats into bench as shown. From the bottom side use uncolored screws (C) to secure
slats. Use screws (A) to attach Side Assemblies to Slats.
AFO
Ver 13.0
B-2.5"colored
A-1.5"colored
C-2"uncolored
A (from behind)
FRONT RAIL
STEP 1 A
SEAT SUPPORTS
36" BENCH (1)
48" BENCH (2)
60" BENCH (3)
STEP 2
RIGHT SIDE ASSEMBLY
B
LEFT SIDE ASSEMBLY
B's
B
STEP 3
Place one end into
slot and bend slat
slightly to fit into
other end.
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
HORIZON BACKLESS BENCH
LIST OF PARTS
Rails (2)
End Assembies (2)
Seat Slats (5)
Seat Supports (see chart)
Hardware (see chart)
Insert Bit Tool (1)
Seat Supports
Bench Size
Screw "A"
Screw "B"
Screw "C"
60"
8
15
36"48"
1 2 3
10
8
8 10 12
8
5
/