2. Breezesta
  3. Horizon High Back Rocker

Breezesta Horizon High Back Rocker Assembly Instructions

  • I've reviewed the provided user manual for the BREEZESTA Horizon High Back Rocker HZ-0300. The document includes step-by-step assembly instructions, a detailed parts list, and information about the different types of screws required for each step. I am ready to answer your questions about assembling this rocker.
  • What screw type is used to attach the Back Assembly and Front Rail to the Right Side Assembly?
    How are the Seat Supports attached?
    What type of screws are used to secure the slats from the bottom side?
    What type of screws are used to attach the Rocker?
Attach Back Assembly and Front Rail to Right Side Assembly
using screws (B) as shown. Attach Seat Support using a screw (A) in the front and screw (B) in the back. Install Slats into slots
provided on Right Side Assembly.
Attach Left Side Assembly as shown using screws (B). From the bottom side use uncolored
screws (C) to secure slats. Use screws (A) to attach Side Assemblies to Slats. Attach Rocker to
bottom with screws (D). F
Ver 13.0
D-3"(4 pcs.)uncolored
C-2"(5 pcs.)uncolored
A-1.5"(7 pcs.)colored
B-2.5"(9 pcs.)colored
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1
FRONT RAIL
B
B
STEP 2
SEAT SUPPORT
A
B (from behind)
SLATS (5)
B
STEP 3
LEFT SIDE ASSEMBLY
A
C
ROCKERS
BREEZESTA tm
Recycled Poly Furniture
HORIZON HIGH BACK ROCKER
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Front Rail (1)
Under Seat Supports (1)
Seat Slats (5)
Rockers (2)
Colored Screws "A" (7)
Colored Screws "B" (9)
Un-Colored Screws "C" (5)
Colored Screws "D" (4)
Insert Bit Tool (1)
HZ-0300
/