2. Breezesta
  3. Horizon Glider Bench Page1

Breezesta Horizon Glider Bench Page1 Assembly Instructions

  • Hello! I am an AI chatbot trained to assist you with the Breezesta Horizon Glider Bench Page1 Assembly Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Attach Side Assemblies to Back Assemblies using screws (B)
as shown.
Attach Front Rail using screws (B) with the metal support to the inside. Place Seat Supports in
place and screw through Back Assembly with screws (B) and through front rail with screws (A).
Fit seat slats into bench as shown. From the bottom side use uncolored screws (C) to secure
slats. Use screws (A) to attach Side Assemblies to Slats. OVer 13.0
B-2.5"colored
A-1.5"colored
C-2"uncolored
B
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1 LEFT SIDE ASSEMBLY
STEP 2
FRONT RAIL
SEAT SUPPORTS
36" BENCH (1)
48" BENCH (2)
60" BENCH (3)
B
A
A (from behind)
B
STEP 3
Place one end into
slot and bend slat
slightly to fit into
other end.
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
HORIZON GLIDER BENCH PAGE 1
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Seat Supports (see chart)
Seat Slats (5)
Hardware (see chart)
Insert Bit Tool (1)
Seat Supports
Bench Size
Screw "A"
Screw "B"
Screw "C"
60"
10
15
36"48"
1 2 3
10
9
8 9 10
8
5
/