Herman Miller Cosm Stool, Cosm Chairs Product Instructions

  • Hello! I've reviewed the instructions for the Cosm Lower Antler Cover replacement. This document provides a step-by-step guide to removing the old cover and installing a new one, including the tool needed (a flat screwdriver) and how to hook in the new cover. I can answer any questions you have about the process.
  • What tool is required for the lower antler cover replacement?
    How do I remove the old lower antler cover?
    How do I install the new lower antler cover?
Tools Required
HermanMiller
Cosm Chair Lower Antler Cover
Replacement
How to dissemble and assemble your
lower antler cover.
Step 2
Step 1
1.1 Insert the flat screw driver into the old lower antler cover hole and gently
pry down until both sides are released.
1.2 Pull and remove the old lower antler cover.
2.1 To install the new lower antler cover, put the back hooks into
casting holes rst and snap the rear edge of the cover down.
New Lower Antler Cover Installation
Flat Screw Driver
1HermanMiller for Cosm chair Dissembly and Reassembly Instructions1BKJD7 rev A
/