2. Herman Miller
  3. Fuld Nesting Chair

Herman Miller Fuld Nesting Chair Product Instructions

  • Hello! I've reviewed the HermanMiller Fuld backrest installation instructions. This document provides a step-by-step guide on how to replace the backrest, including the required tools and steps for both removal and installation. I'm ready to answer any questions you may have regarding this or the listed features.
  • What tool is required for this backrest replacement?
    What is the first step in replacing the backrest?
    What should be removed from the old backrest before replacing it?
Parts Included
HermanMiller
Fuld Backrest Service Instructions
How to assemble your Backrest
Backrest
Tools Required
T- Torx
driver
. Remove bolts from underside of rear legs.
. Remove backrest from remaining chair
. Remove rear caster feet or glide assemblies from old backrest.
Step 1
Step 2Backrest replacement
1HermanMiller Fuld chair Installation Instructions1BVCHJ rev A
2HermanMiller Fuld chair Installation Instructions1BVCHJ rev A
For more information about our products and services please visit us at
hermanmiller.com or call ()  .
© Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. BVCHJ  A
Step 4Step 3
. Place new backrest onto C leg inserts on existing chair assembly.
. Drive bolts into rear most holes in leg insert. Seat Torque
is  in-lb.
. Drive bolts into forward most holes in leg insert. Seat Torque
is  in-lb
. Caster feet or glide assemblies insert into new backrest.
/