2. Herman Miller
  3. Fuld Nesting Chair

Herman Miller Fuld Nesting Chair Product Instructions

  • Hello! I have reviewed the provided installation instructions for the HermanMiller Fuld glide replacement. This document details the necessary steps for replacing both the front and rear glides using a non-marring hammer. I'm ready to answer any questions you may have about the glide replacement process.
  • What tool is required for glide assembly?
    How do I remove the front glide?
    How to install the rear glide?
Parts Included
HermanMiller
Fuld Glide Service Instructions
How to assemble your Glide
Step 2
Step 1
Glide Assembly Replacement
Front Glide Rear Glide
1.1 Using a non-marring hammer, gently tap rear surface of Front Glide
Assembly until it comes free from leg tube.
2.1 Using a non-marring hammer, gently tap front surface of replacement
Front Glide Assembly until fully seated in leg tube .
Tools Required
Hammer
1HermanMiller Fuld chair Installation Instructions1BVCHL rev A
2HermanMiller Fuld chair Installation Instructions1BVCHL rev A
Step 4Step 3
4.1 Push replacement Rear Glide Assembly into Backrest.
For more information about our products and services please visit us at
hermanmiller.com or call (800) 851 1196.
©2023 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. BVCHL  A
3.1 Pull down on Rear Glide Assembly until free from Backrest.
/