Herman Miller Cosm Stool, Cosm Chairs Product Instructions

  • Hello! I am a chat assistant familiar with the instructions for the HermanMiller Cosm 1D Arm Pad replacement. This document details the process of removing and installing the arm pad, using a T-20 torx bit and a hooking mechanism. I'm ready to answer your questions about these instructions.
  • What tool is required to remove the old arm pad?
    How is the new arm pad secured?
Tools Required
HermanMiller
Cosm Chair 1D Arm Pad Replacement
How to dissemble and assemble your
1d arm pad.
Step 1
Step 2
New 1D Arm Pad Installation
T- Torx Bit
. Using T- torx bit, unscrew the arm pad retainer bolt and
take out the old arm pad.
. Place the two hooks of d upper arm assembly under the
ledge at the front of new arm pad.
. Hook in the front of arm pad and install it using T- torx bit.
1HermanMiller for Cosm chair Dissembly and Reassembly Instructions1BKJDJ rev A
/