7.1CUSTOMER SERVICE PHONE: 1-800-426-8562
Section 7 - Accessories
PERGOLA®
Tray
Coat Hanger
TV Mount (Workware)
Spanning Top
(Full)
Spanning Top
(Half)
Ledge
LA
MA
NA
PA
OA
QA
RA RA1
7.2CUSTOMER SERVICE PHONE: 1-800-426-8562
Horizontal Tile Rail - Tile Horizontal Tile-Insert Rail
Tray or Ledge Installation
TRAY LEDGE COAT HANGER
PULL CORNER TO REMOVE
OR OR
1
2
LA
MA
PA
PA
LM
M
7.3CUSTOMER SERVICE PHONE: 1-800-426-8562
Install hanger to top rail
1
Coat Hanger Installation
SIDE VIEW
NOTE: Make sure the coat
hanger is fully engaged.
QA
QA
QA
C
C
CUSTOMER SERVICE PHONE: 1-800-426-8562 7.4
Spanning Top Installation
Install plates to underside of top
1
FULL
HALF
#10 x 1" Pan Head Screw
(S-1)
NA
NA1
NA1
NA1
S-1
S-1
OA
Spanning Top Installation
CUSTOMER SERVICE PHONE: 1-800-426-8562 7.5
Install anti-twist brackets and foam tape
2
NOTE: 3rd bracket is for split
tops only. Make sure the square
end of the bracket is centered
supporting both tops. NOTE: Refer to Section 3,
Horizontal Tile - Insert Rail -
Support Bracket (M2).
NOTE: The foam tape is
applied to the opposite side
the worksurface overhangs.
144”
72”
Foam Tape
Foam Tape
#8 x 3/4" Self-Drilling Screw
(S105)
OA
M
M
M3
M4
M3
S105
MM
NOTE: Wipe mounting
surface area with
Isopropyl Alcohol to
ensure area cleaned
and achieve full bond.
ISOPROPYL
ALCOHOL
M
M2
M3
CUSTOMER SERVICE PHONE: 1-800-426-8562 7.6
Install shelf top to horizontal tile rail
3
Install brackets
4
Shelf Top Installation
NOTE: Careful not to
scratch top of rail in case
of future reloacation.
#10-32 x 2-1/2" Pan Head Screw
(S275)
#10 x 1" Pan Head Screw
(S-1)
NA
NA
NA2
S275
S105
S105
M
CUSTOMER SERVICE PHONE: 1-800-426-8562 7.7
Install tiles
5
Shelf Top Installation
M
Install covers
6
#6-32 x 3/8" Flat Head Screw
(S276)
NA
NA3
S276
R
R
NA
NA
CUSTOMER SERVICE PHONE: 1-800-426-8562 7.8
Worksurface Installation
Bracket Template
16” Maximum
24” Maximum
9/16” (.5625”)
1-7/16” (1.4375”)
Back Edge of Worksurface
Bottom of Worksurface
3/4”
1/8”
Drill
Use template to locate and predrill holes
1
SA
CUSTOMER SERVICE PHONE: 1-800-426-8562 7.9
Worksurface Installation
Before installing brackets determine if the tile is above or below the worksurface
2
TILE
TILE
TILE - INSERT RAIL
TILE - TILE RAIL
OR
#10 x 5/8" Pan Head Screw
(S-3)
#10 x 5/8" Pan Head Screw
(S-3)
S-3
TA
TA
TA
TA2
S-3
TA
TA2
TA3
TA3
CUSTOMER SERVICE PHONE: 1-800-426-8562 7.10
Worksurface Installation
Install worksurface
2
NOTE: The worksurfaces must be
supported on back edge by mounting
to pergola and on the front edge by
worksurface legs.
CUSTOMER SERVICE PHONE: 1-800-426-8562 7.11
Worksurface Removal
Remove worksurface
3
1
2
TA
TA
CUSTOMER SERVICE PHONE: 1-800-426-8562 7.12
TV Mount (Workware)
Install TV mount level
1
RA
S280
#10-12 x 1-3/8" Pan Head Screw
(S280)
2
1
RA1
WH2
CH
WH
WH1
CUSTOMER SERVICE PHONE: 1-800-426-8562 7.13
TV Mount (Workware)
Install brackets to TV
2
Hang TV
3
NOTE: A variety of screw sizes and
spacers are provided to accommodate
a wide range of TV’s.
NOTE: Install cables and plugs before
proceeding to the next step.
NOTE: Due to various
setups cables are
supplied by the
customer. OR
RA
RA
RA
CH
TH
TH
3
RA1
RA1
NOTE: Maximum load: 75 Kg. (165 lbs)
/
