Haworth 7029-9933 Operating instructions

  • Hello! I've reviewed the installation instructions for the Height Adjustable Table Suite Electric. The document covers important safety guidelines, step-by-step assembly procedures, and electrical specifications. I'm ready to help with any questions you may have about this product.
  • What is the first step to do before cleaning?
    What should you do if the cord is damaged?
    What is the recommended power source for the product?
GROUNDED
OUTLET
GROUNDED
OUTLET BOX
GROUNDED
PIN
(A) FIGURE 1
1 of 6 7029-9933 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1560-045
Electrical Rating: 120V, 60Hz, 4A
Max Static Load: 100 lbs
IMPORTANT SAFETY INSTRUCTIONS
For use with Suite Electric Height Adjustable Table
For Commercial Use Only
This product conforms to UL962, certied to CAN/CSA C22.2 No. 68
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using this table.
DANGER - To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning.
WARNING - TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
1. Unplug from outlet before putting on or taking o parts.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recom-
mended by the manufacturer.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the furnishing to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn all controls to the o position, then remove plug from outlet.
9. WARNING: RISK OF ELECTRIC SHOCK - CONNECT THIS FURNISHING TO A PROPERLY GROUNDED
OUTLET ONLY. SEE GROUNDING INSTRUCTIONS.
SAVE THESE INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualied electrician or serviceman if you are in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product - if it will not t the outlet, have a proper outlet installed by a
qualied electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in sketch A
(see Figure 1). Make sure that the product is connected to an outlet having the same conguration as the plug. No adapter
should be used with this product.
S-12
D
S-1
C
E
S-10
S-10
S-3
S-3
S-16
B
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1560-045 2 of 6 7029-9933
Tools Required
Convergent Top for 1.5H
Storage - T-Leg
Installation Instructions
SUITE ®
#2
5mm
8mm
FOR ELECTRIC TABLES
S-1
S-1
N2
N
Standard
Switch
Programmable
Switch
OR
MControl Module
B
E
F
S-10
A
Worksurface
Worksurface
Bracket
Cover
G Wood Base
Support Leg
Leg
Bracket
E3
Leg
Bracket
E2
S-1
J
Trim
(only used
for cutout)
(S-10)
Socket Cap M6 X 12mm
#10 x 1" Pan Head Screw
(S-1)
H
Grommet
T-Foot
M10 X 30mm Button Head
(S-12)
OR
#10 x 5/8" Pan Head Screw
(S-3)
S-10
S-12
M10 X 30mm Button Head
(S-12)
E
F
G
1
2 3a
3b
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1560-045 3 of 6 7029-9933
B
E
S-10
B
S-10
E3
S-16
E
S-3
S-3
M10 X 50mm Flat Head Screw
(S-16)
(S-10)
Socket Cap M6 X 12mm
2 31
S-3
S-10
S-10
E2
E2
(S-10)
Socket Cap M6 X 12mm
#10 x 5/8" Pan Head Screw
(S-3)
E2
1.5H STORAGE CREDENZA OR
C
B
E
3
4
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1560-045 4 of 6 7029-9933
A
S-1
J
#10 x 1" Pan Head Screw
(S-1)
H
1
2
#10 x 1" Pan Head Screw
(S-1)
3
S-1
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1560-045 5 of 6 7029-9933
5
N
OR 3
2
S-1
#10 x 1" Pan Head Screw
(S-1)
N2
N
OR
M1
S-1
#10 x 1" Pan Head Screw
(S-1)
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1560-045 6 of 6 7029-9933
6
S-1
1
2
D
N
/