Right Weigh 201-EBT-30B-WB Installation guide

Type
Installation guide

Right Weigh 201-EBT-30B-WB is a versatile and easy-to-use digital weight scale that can be used in a variety of applications, including:

  • Tractor or Straight Truck with Walking-Beam Suspension: The kit includes all the necessary components to install the gauge and sensors on your vehicle.

The gauge can be set to detect up to 3 spring sensors, and it can be configured to measure weight in either kilograms or pounds. The gauge also features a high/low alarm that can be set to warn you when the weight on your vehicle exceeds a certain limit.

Additional Features:

  • Easy-to-read LCD display

Right Weigh 201-EBT-30B-WB is a versatile and easy-to-use digital weight scale that can be used in a variety of applications, including:

  • Tractor or Straight Truck with Walking-Beam Suspension: The kit includes all the necessary components to install the gauge and sensors on your vehicle.

The gauge can be set to detect up to 3 spring sensors, and it can be configured to measure weight in either kilograms or pounds. The gauge also features a high/low alarm that can be set to warn you when the weight on your vehicle exceeds a certain limit.

Additional Features:

  • Easy-to-read LCD display
INSTALLATION OVERVIEW
201-EBT-30B-WB
This installaon overview is not a substute for reading the product manuals
WHAT’S INCLUDED
PP-003-0060 REV D
CONTACT US!
Right Weigh, Inc.
(888) 818-2058
www.rwls.com
Follow Us!
1 x 201-217-30 - Gauge and mounng bracket
2 x 218-SK - Weld strain sensor installaon kit
SENSOR CONFIGURATION
The gauge should be set to detect 3 Spring Sensors. See Spring Suspension
Gauge manual for more informaon on how to set the sensor configuraon.
www.rwls.com
ON/OFF
HOLD 3 SECONDS
CALIBRATE
C
HIGH
1C
LOW
234
ENTER
MENU
i
EL-003-0004
1 2 3 4 C/H C/L - KG LBS
Scan here to see addional resources on our
website including full installaon manuals,
quick set up guides, and video tutorials!
APPLICATIONS
Tractor or Straight Truck with Walking-Beam Suspension
Suspension Compability:
This kit is compable with the drive axle suspension models listed below, however it may also fit others that are not listed. Please refer to the notes
next to your model for any specific installaon concerns.
Make Model Applicaon Notes
Chalmers 800
Hendrickson Haulmax
Hendrickson HN
Hendrickson RS Not for use on models with cast equalizing beams.
Hendrickson RT Not for use on models with cast equalizing beams.
Other models Not for use on models with cast equalizing beams. Check for clearance between top of equalizing
beam and vehicle frame to ensure sensor will not be damaged during suspension arculaon.
C
B
A
1 x 221-SK - Epoxy strain sensor installaon kit
Sensor Locaon:
Strain sensorA” should be installed on the top, center of the steer axle
using the 221-SK kit. Sensors “B” and “C” from the 218-SK installaon
kits should be installed on the top of each equalizing beam with one
mounted near the front of the vehicle and the other mounted towards
the rear (see image to the right).
Mode:
Set the gauge to Front 1 Back 2 (F1b2) mode. This mode measure
sensor “A” as one axle group weight and sensors “B” and “C” as another
axle group weight. See Spring Suspension Gauge manual for
informaon on how to set the mode.
  • Page 1 1

Right Weigh 201-EBT-30B-WB Installation guide

Type
Installation guide

Right Weigh 201-EBT-30B-WB is a versatile and easy-to-use digital weight scale that can be used in a variety of applications, including:

  • Tractor or Straight Truck with Walking-Beam Suspension: The kit includes all the necessary components to install the gauge and sensors on your vehicle.

The gauge can be set to detect up to 3 spring sensors, and it can be configured to measure weight in either kilograms or pounds. The gauge also features a high/low alarm that can be set to warn you when the weight on your vehicle exceeds a certain limit.

Additional Features:

  • Easy-to-read LCD display

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI