Right Weigh 201-EBT-10B Installation guide

201-EBT-10B
Brand
Right Weigh
Model
201-EBT-10B
Type
Installation guide
INSTALLATION OVERVIEW
201-EBT-10B
This installaon overview is not a substute for reading the product manuals
WHAT’S INCLUDED
APPLICATIONS
Single Axle Trailer Single Point Trailer Axle
Sensor Locaon: Sensor Locaon:
Mode:
The strain sensor should be located on
the top, center of the axle. See 218-SK
manual for more informaon on how to
install the sensor.
The strain sensor should be located on the
top, center of the trunnion tube. See
218-SK manual for more informaon on
how to install the sensor.
Set the gauge to Average (AVG) mode - measures average weight of all axles on axle group. See Spring Suspension Gauge manual for informaon
on how to set the mode.
PP-003-0051 REV C
A
Straight Truck with Trunnion Tube
Sensor Locaon:
The strain sensor should be located on the
top, center of the trunnion tube. See
218-SK manual for more informaon on
how to install the sensor.
CONTACT US!
Right Weigh, Inc.
(888) 818-2058
www.rwls.com
[email protected]
Follow Us!
AA
1 x 201-217-30 - Gauge and mounng bracket
1 x 218-SK - Weld strain sensor installaon kit
SENSOR CONFIGURATION
The gauge should be set to detect 1 Spring Sensor. See Spring Suspension
Gauge manual for more informaon on how to set the sensor configuraon.
www.rwls.com
ON/OFF
HOLD 3 SECONDS
CALIBRATE
C
HIGH
1C
LOW
234
ENTER
MENU
i
EL-003-0004
1 2 3 4 C/H C/L - KG LBS
Scan here to see addional resources on our
website including full installaon manuals,
quick set up guides, and video tutorials!
  • Page 1 1

Right Weigh 201-EBT-10B Installation guide

201-EBT-10B
Brand
Right Weigh
Model
201-EBT-10B
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents