Right Weigh 201-EBT-12B Installation guide

201-EBT-12B
Brand
Right Weigh
Model
201-EBT-12B
Type
Installation guide

Right Weigh 201-EBT-12B is a weight monitoring system that provides accurate weight measurements for various vehicle types, including straight trucks and spring steer vehicles. It features a gauge that displays weight data and allows customization of sensor configuration and mode settings. The system includes a strain sensor for the steer axle, air sensors for the drive axle airbags, and necessary installation kits for a complete setup. It operates in different modes, such as Spring Average Air Average and Spring Average Air Independent, to accommodate various axle configurations.

Right Weigh 201-EBT-12B is a weight monitoring system that provides accurate weight measurements for various vehicle types, including straight trucks and spring steer vehicles. It features a gauge that displays weight data and allows customization of sensor configuration and mode settings. The system includes a strain sensor for the steer axle, air sensors for the drive axle airbags, and necessary installation kits for a complete setup. It operates in different modes, such as Spring Average Air Average and Spring Average Air Independent, to accommodate various axle configurations.

INSTALLATION OVERVIEW
201-EBT-12B
This installaon overview is not a substute for reading the product manuals
WHAT’S INCLUDED
APPLICATIONS
Straight Truck: Spring Steer and Dual HCV Air
Drive Axle Groups
Sensor Locaon: Sensor Locaon:
Mode:
Mode:
The strain sensor should be located on the top, center of the steer axle.
See 221-SK manual for more informaon on how to install the sensor.
The air sensors should be connected directly to an air bag on each side
of the drive axle group. See 201-SK and 101-SK installaon manuals for
more informaon on how to install the air line connecons.
The strain sensor should be located on the top, center of the steer
axle. See 221-SK manual for more informaon on how to install the
sensor. Air sensor A should be connected directly to an air bag on the
li axle and air sensor B should be connected directly to an air bag on
the drive axle group. See 201-SK and 101-SK installaon manuals for
more informaon on how to install the air line connecons.
Set the gauge to Spring Average Air Average (SA AA) mode - separates
weight into front axle group (steer) and back axle group (drive). See
Air/Spring Suspension Gauge manual for informaon on how to set the
mode.
PP-003-0053 REV D
Spring Steer, Air Li Axle, and Air Drive Axle Groups
CONTACT US!
Right Weigh, Inc.
(888) 818-2058
www.rwls.com
[email protected]
Follow Us!
Set the gauge to Spring Average, Air Independent (SA Ai) mode -
separates weight into front axle group(steer), and two independent
air axle groups (li axle and drive axle groups). See Air/Spring
Suspension Gauge manual for informaon on how to set the mode.
1 x 201-217-32 - Gauge and mounng bracket
1 x 221-SK - Epoxy strain sensor installaon kit
SENSOR CONFIGURATION
The gauge should be set to detect 1 Spring Sensor. See Air/Spring
Suspension Gauge manual for more informaon on how to set the sensor
configuraon.
www.rwls.com
ON/OFF
HOLD 3 SECONDS
CALIBRATE
C
HIGH
1C
LOW
234
ENTER
MENU
i
EL-003-0004
1 2 3 4 C/H C/L - KG LBS
Scan here to see addional resources on our
website including full installaon manuals,
quick set up guides, and video tutorials!
1 x 201-SK - Air line and electrical installaon kit
1 x 101-SK - Air line installaon kit
A
A
  • Page 1 1

Right Weigh 201-EBT-12B Installation guide

201-EBT-12B
Brand
Right Weigh
Model
201-EBT-12B
Type
Installation guide

Right Weigh 201-EBT-12B is a weight monitoring system that provides accurate weight measurements for various vehicle types, including straight trucks and spring steer vehicles. It features a gauge that displays weight data and allows customization of sensor configuration and mode settings. The system includes a strain sensor for the steer axle, air sensors for the drive axle airbags, and necessary installation kits for a complete setup. It operates in different modes, such as Spring Average Air Average and Spring Average Air Independent, to accommodate various axle configurations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents