2. Breezesta
  3. Skyline Garden Chair

Breezesta Skyline Garden Chair Assembly Instructions

  • Hello! I'm a chat assistant and I've read the user manual for the Skyline SK-0408 garden chair. This document provides step-by-step instructions with diagrams on how to assemble the chair, and it details the list of parts required, including different types of screws. I'm ready to answer any questions you might have regarding the assembly process or the components of this chair.
  • What are the different types of screws used in the assembly?
    How many seat slats are there?
    What is the first step of the assembly?
Attach Back Assemblies and Front Rail to Right Side
Assembly using screws (B) as shown.
Attach Seat Supports using a screw (A) in the front and screw (B) in the back. Install Slats into
slots provided on Right Side Assembly.
Fit seat slats into chair as shown. From the bottom side use uncolored screws (C) to secure slats.
Use screws (A) to attach Side Assemblies to Slats. A
Ver 13.0
B-2.5"(9 pcs.)colored
A-1.5"(7 pcs.)colored
C-2"(5 pcs.)uncolored
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1
FRONT RAIL
B
STEP 2
SEAT SUPPORT
A
B (from behind)
SLATS (5)
B
STEP 3
LEFT SIDE ASSEMBLY
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
SKYLINE GARDEN CHAIR
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Front Rail (1)
Under Seat Supports (1)
Seat Slats (5)
Colored Screws "A" (7)
Colored Screws "B" (9)
Un-Colored Screws "C" (5)
Insert Bit Tool (1)
SK-0408
/