2. Breezesta
  3. Horizon Garden Chair

Breezesta Horizon Garden Chair Assembly Instructions

  • I've reviewed the assembly instructions for the BREEZESTA Horizon HZ-0308 Garden Chair. The document provides a step-by-step guide on how to put together the chair, detailing the use of different screws for various parts of the frame. It also includes a parts list to make sure you have everything you need. I'm ready to answer your questions about the assembly process or any other aspect of the chair.
  • What screw is used to attach the Back Assemblies and Front Rail to Right Side Assembly?
    What screw is used to attach Seat Supports?
    What screws are used to secure the slats?
Attach Back Assemblies and Front Rail to Right Side
Assembly using screws (B) as shown.
Attach Seat Supports using a screw (A) in the front and screw (B) in the back. Install Slats into
slots provided on Right Side Assembly.
Fit seat slats into chair as shown. From the bottom side use uncolored screws (C) to secure slats.
Use screws (A) to attach Side Assemblies to Slats. A
Ver 13.0
B-2.5"(9 pcs.)colored
A-1.5"(7 pcs.)colored
C-2"(5 pcs.)uncolored
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1
FRONT RAIL
B
STEP 2
SEAT SUPPORT
A
B (from behind)
SLATS (5)
B
STEP 3
LEFT SIDE ASSEMBLY
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
HORIZON GARDEN CHAIR
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Front Rail (1)
Under Seat Supports (1)
Seat Slats (5)
Colored Screws "A" (7)
Colored Screws "B" (9)
Un-Colored Screws "C" (5)
Insert Bit Tool (1)
HZ-0308
/