2. Breezesta
  3. Ridgeline Garden Chair

Breezesta Ridgeline Garden Chair Assembly Instructions

  • Hello! I'm your chat assistant. I have reviewed the user manual for the BREEZESTA Garden Chair Ridgeline RL-0208. This document provides clear, step-by-step instructions for assembling the chair, detailing the use of different screws and the various components involved. I'm ready to answer any questions you might have about assembling this chair!
  • What types of screws are used to assemble the chair?
    How many slats are included?
    Which screws are used to attach the Seat Supports
Attach Back Assemblies and Front Rail to Right Side
Assembly using screws (B) as shown.
Attach Seat Supports using a screw (A) in the front and screw (B) in the back. Install Slats into
slots provided on Right Side Assembly.
Fit seat slats into chair as shown. From the bottom side use uncolored screws (C) to secure slats.
Use screws (A) to attach Side Assemblies to Slats. A
Ver 13.0
B-2.5"(9 pcs.)colored
A-1.5"(7 pcs.)colored
C-2"(5 pcs.)uncolored
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1
FRONT RAIL
B
STEP 2
SEAT SUPPORT
A
B (from behind)
SLATS (5)
B
STEP 3
LEFT SIDE ASSEMBLY
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
RIDGELINE GARDEN CHAIR
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Front Rail (1)
Under Seat Supports (1)
Seat Slats (5)
Colored Screws "A" (7)
Colored Screws "B" (9)
Un-Colored Screws "C" (5)
Insert Bit Tool (1)
RL-0208
/