2. Breezesta
  3. Ridgeline backless Bench

Breezesta Ridgeline backless Bench Assembly Instructions

  • Hello! I'm here to help you with your Ridgeline Backless Bench assembly. I have reviewed the user manual, which includes step-by-step instructions, part lists, and different sized seat configuration. I can answer specific questions about the assembly process or clarify any part of the manual.
  • How many seat supports are needed for a 48" bench?
    What size are the colored screws labeled 'B'?
    How many seat slats are included in the parts list?
    What type of screws is used to secure the slats from the bottom?
Attached Side Assemblies to Rail Assembly using screws (B)
as shown.
Place Seat Supports in place and using screws (A), attach the Rails as shown in the drawing
Fit seat slats into bench as shown. From the bottom side use uncolored screws (C) to secure
slats. Use screws (A) to attach Side Assemblies to Slats.
AFO
Ver 13.0
B-2.5"colored
A-1.5"colored
C-2"uncolored
A (from behind)
FRONT RAIL
STEP 1 A
SEAT SUPPORTS
36" BENCH (1)
48" BENCH (2)
60" BENCH (3)
STEP 2
RIGHT SIDE ASSEMBLY
B
LEFT SIDE ASSEMBLY
B's
B
STEP 3
Place one end into
slot and bend slat
slightly to fit into
other end.
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
RIDGELINE BACKLESS BENCH
LIST OF PARTS
Rails (2)
End Assembies (2)
Seat Slats (5)
Seat Supports (see chart)
Hardware (see chart)
Insert Bit Tool (1)
Seat Supports
Bench Size
Screw "A"
Screw "B"
Screw "C"
60"
8
15
36"48"
1 2 3
10
8
8 10 12
8
5
/