Extron Cable Cubby 1252 M Template

Extron
Brand
Extron
Model
Cable Cubby 1252 M
Type
Template

This manual is also suitable for

2.00"
(50.8 mm)
2.00"
(50.8 mm)
0.63"
(15.9 mm)
10.50"
(266.7 mm)
0.63"
(15.9 mm)
R= 0.25" (6.3 mm)
8.81"
(223.8 mm)
5.25"
(133.3 mm)
Mounting Template for the Extron
Cable Cubby 1252 MS
User Access
P/N 68-3508-01 Rev. A
Page Size: 11" x 17"
Print Scale 1:1
Do not Shrink
Mark and pre-drill
the six pilot holes
0.125" (3.2mm)
diameter, 0.50"
(12.7 mm) deep.
9.50"
(241.3 mm)
Cutout area for
thin lid
Cutout area for
thick lid
Cable Cubby opening
1. Measure and confirm the Cable Cubby
opening based on the unit’s lid thickness.
2. Remove the correct template cutout area
and line up the template to the Cable Cubby
opening from underneath furniture.
3. Mark and drill 0.125" (3.2 mm) diameter,
0.50" (12.7 mm) deep holes at the marked
six mounting locations (+).
  • Page 1 1

Extron Cable Cubby 1252 M Template

Extron
Brand
Extron
Model
Cable Cubby 1252 M
Type
Template
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents