Extron Cable Cubby 1400 Template

10"

(254 mm)

SURFACE

CUT-OUT

AREA

(172 mm)

” (1.5 mm)

1. Confirm the product to be installed.

2. Remove the surface cut-out area

(gray) from the template.

3. Measure the cutout and template.

4. Mark the position on the

furniture where the Cable Cubby 1400

will be installed.

5. Double check dimensions and position,

then cut the opening.

Cut-Out Template for the Extron

Cable Cubby 1400

User Access

Trim Ring

Lip

P/N 68-2473-01 Rev. B

Outer Edge of Front Bezel

(Do not cut this line.)

Page size: 11" x 17"

Print scale 1:1

Do not shrink.

" (6 mm) R