Extron Cable Cubby 100 Template

Cut-Out Template for the Extron

Cable Cubby 100

Print this

template

at 100%

P/N 68-3493-01 Rev. A

4.00" Dia.

(102 mm)

SURFACE CUT-OUT

AREA

User Access

Outer edge

(Do not cut this line)

1. Confirm the product to be installed.

2. Remove the surface cut-out area (gray) from the template.

3. Measure the cutout and template.

4. Mark the position on the furniture where the Cable Cubby 100

will be installed.

5. Double-check dimensions and position, then cut the opening.