Extron Cable Cubby 700 Template

P/N 68-2600-01 Rev. B

SURFACE

CUT-OUT

AREA

(181 mm)

(146 mm)

” (1.5 mm)

Cut-Out Template for the Extron

Cable Cubby 700

User Access

Table Clamp

Trim Ring’s Outer Edge

(Do not cut this line.)

1. Confirm the product to be installed.

2. Before printing, double check print settings

and make sure the page is not scaled.

3. Remove the surface cut-out area (gray)

from the template.

4. Measure the cutout and template.

5. Mark the position on the furniture where

the Cable Cubby 700 will be installed.

6. Double check dimensions and position,

then cut the opening.

Page Size: 11" x 17"

Print Scale 1:1

Do not Shrink

" (6 mm) R