Extron Cable Cubby 500 Template

" (6 mm) R

P/N 68-2599-01 Rev. B

SURFACE

CUT-OUT

AREA

(146 mm)

” (1.5 mm)

User Access

Table Clamp

Trim Ring’s Outer Edge

(Do not cut this line.)

Cut-Out Template for the Extron

Cable Cubby 500

Page Size: 11" x 17"

Print Scale 1:1

Do not Shrink

1. Confirm the product to be installed.

2. Before printing, double check print settings

and make sure the page is not scaled.

3. Remove the surface cut-out area (gray)

from the template.

4. Measure the cutout and template.

5. Mark the position on the furniture where

the Cable Cubby 500 will be installed.

6. Double check dimensions and position,

then cut the opening.