Cut-Out Template for the Extron
Cable Cubby 202
User Access
Outer Edge of Front Bezel
(Do not cut this line.)
1. Confirm the product to be installed.
2. Before printing, double-check print settings
and make sure the page is not scaled.
3. Remove the surface cut-out area (gray)
from the template.
4. Measure the cutout and template.
5. Mark the position on the furniture where
the Cable Cubby 202 will be installed.
6. Double check dimensions and position,
then cut the opening.
P/N 68-2488-01 Rev. B
Page size: 11" x 17"
Print scale 1:1
Do not shrink.
3
1
/
4
"
(83 mm)
7"
(178 mm)
SURFACE
CUT-OUT
AREA
1
/
16
” (1.5 mm)
+
-
1
/
4
" (6 mm) R
/
