2. Breezesta
  3. Ridgeline Double High Back Rocker

Breezesta Ridgeline Double High Back Rocker Assembly Instructions

  • Hello! I've reviewed the user manual for the Breezesta Rocker Ridgeline RL-0203. The document contains detailed instructions on how to assemble the double highback rocker, including a parts list and step-by-step diagrams. It also specifies different colored and uncolored screws for different assembly steps. I'm ready to answer any questions you have about its assembly or features!
  • What type of screws are used to attach the side assemblies to the back assemblies?
    What type of screws are used to attach the front rail?
    What type of screws are used to secure the seat slats from the bottom?
Attach Side Assemblies to Back Assemblies using screws (B)
as shown. Attach Front Rail using screws (B) with the metal support to the inside. Place Seat Supports in place and
screw through Back Assembly with screws (B) and through front rail with screws (A).
Attach Left Side Assembly as shown using screws (B). Fit seat slats into bench as shown. From
the bottom side use uncolored screws (C) to secure slats. Use screws (A) to attach Side
Assemblies to Slats. Attach Rocker to bottom with screws (D). G
Ver 13.0
B-2.5"(10 pcs.)colored
A-1.5"(8 pcs.)colored
C-2"(10 pcs.)uncolored
D-3"(4 pcs.) uncolored
B
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1 LEFT SIDE ASSEMBLY
STEP 2
FRONT RAIL
B
A
B (from behind)
B
STEP 3
Place one end into
slot and bend slat
slightly to fit into
other end.
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
RIDGELINE DOUBLE HIGHBACK ROCKER
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Front Rail (1)
Under Seat Supports (2)
Seat Slats (5)
Rockers (2)
Colored Screws "A" (8)
Colored Screws "B" (10)
Un-Colored Screws "C" (10)
Un-Colored Screw "D" (4)
Insert Bit Tool (1)
RL-0203
/