2. Breezesta
  3. Horizon Garden Bench

Breezesta Horizon Garden Bench Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BREEZESTA HORIZON HZ-0305 Garden Bench. This document explains how to put together your bench using a three-step process. It specifies the different types of screws (A, B, C) and how to use them with the various parts. I'm here to help if you have any questions about assembly or the components listed in the instructions.
  • What are the different screw types used?
    How many seat slats are included?
    What is included in hardware kit?
Attach Side Assemblies to Back Assemblies using screws (B)
as shown.
Attach Front Rail using screws (B) with the metal support to the inside. Place Seat Supports in
place and screw through Back Assembly with screws (B) and through front rail with screws (A).
Fit seat slats into bench as shown. From the bottom side use uncolored screws (C) to secure
slats. Use screws (A) to attach Side Assemblies to Slats.
OFO
Ver 13.0
B-2.5"colored
A-1.5"colored
C-2"uncolored
B
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1 LEFT SIDE ASSEMBLY
STEP 2
FRONT RAIL
SEAT SUPPORTS
36" BENCH (1)
48" BENCH (2)
60" BENCH (3)
B
A
B (from behind)
B
STEP 3
Place one end into
slot and bend slat
slightly to fit into
other end.
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
HORIZON GARDEN BENCH
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Seat Supports (see chart)
Seat Slats (5)
Hardware (see chart)
Insert Bit Tool (1)
Seat Supports
Bench Size
Screw "A"
Screw "B"
Screw "C"
60"
11
15
36"48"
1 2 3
10
10
7 8 9
9
5
/