Breezesta Ridgeline Park Bench Assembly Instructions

Brand
Breezesta
Model
Ridgeline Park Bench
Type
Assembly Instructions
Attach Side Assemblies to Back Assemblies using screws (B)
as shown.
Attach Front Rail using screws (B) with the metal support to the inside. Place Seat Supports in
place and screw through Back Assembly with screws (B) and through front rail with screws (A).
Fit seat slats into bench as shown. From the bottom side use uncolored screws (C) to secure
slats. Use screws (A) to attach Side Assemblies to Slats.
OFO
Ver 13.0
B-2.5"colored
A-1.5"colored
C-2"uncolored
B
RIGHT SIDE ASSEMBLY
BACK ASSEMBLY
STEP 1 LEFT SIDE ASSEMBLY
STEP 2
FRONT RAIL
SEAT SUPPORTS
36" BENCH (1)
48" BENCH (2)
60" BENCH (3)
B
A
B (from behind)
B
STEP 3
Place one end into
slot and bend slat
slightly to fit into
other end.
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
RIDGELINE PARK BENCH
LIST OF PARTS
Back Assembly (1)
Left End Assembly (1)
Right End Assembly (1)
Front Rail (1)
Seat Supports (see chart)
Seat Slats (5)
Hardware (see chart)
Insert Bit Tool (1)
Screw "C"
Screw "B"
Screw "A"
15 5 11 9 9 8
7 10
10
Bench Size
Seat Supports 3 2
1 60"48"36"
  • Page 1 1

Breezesta Ridgeline Park Bench Assembly Instructions

Brand
Breezesta
Model
Ridgeline Park Bench
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents