Assembly Instructions: 1818-5 (Diaz)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
ASSEMBLING THE FIXTURE
3.Placethebodyofthextureontoaatsurfaceandspreadthearmsevenly.
Toploop(L)andoneofdecorativechains(O)areonthexture’swires,butare
notattachedtothebodyofthexture.Connectdecorativechain(O)tohooks
(N)and(M).Pullthewiresuntiltaut.
4.Bymeasuring,determinethecorrectlengthofchainneededforproper
hangingheight.Ifnecessary,useapairofplierstoopenandremoveanyexcess
chain.Attachoneofchainconnectors(K)tochain(J).Passthexture’swires
throughtoploop(L).Pullthewiresuntiltaut.Attachoneendofchainconnector
(K)totoploop(L)andclosechainconnector(K).Feedthexture’swiresup
throughthechain(everythreelinksorso),pullingthewiresuntiltaut.Usethe
freechainconnector(K)toattachchain(J)tocanopyloop(H).Slidecanopy
loopcollar(H)thencanopy(G)downontothechain/wires.Pullthewiresuntil
taut.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, please
contact the place of purchase.
CONNECTING THE WIRES
5.Add8to10inchestothedesiredlengthofwireandtrimtheexcesswires.Haveanassistantsupporttheweightofthexture.Refer
tothewiringdiagramandattachthexture’swirestothepowersupplywiresfromthejunctionbox.ConnectHottoHot,Neutralto
Neutral,andGroundtoGround.Twisttheendsofthewirepairstogether,andthentwistonawireconnector.Makesurealltwistsare
inthesamedirection.Ifthereisnohousegroundwirecomingfromthejunctionbox,locategroundscrew(E)onthemountingbracket/
mountingstrapandwrapthexture’sgroundwirearoundthegroundscrew.Useascrewdrivertotightenthetopofgroundscrew(E)
ontothewiresandintothemountingbracket/mountingstrap.Tuckthewiresintothejunctionbox.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
FINISHING THE INSTALLATION
6.Pushcanopy(G)uptotheceilingandslidecanopyloopcollar(I)upbeneaththecanopy.Tightlythreadcanopyloopcollar(I)onto
canopyloop(H)tosecurecanopy(G)inplace.
7.Slidecandlesleeves(P)overthesockets.
8.Installlightbulbs(notincluded)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommendedwattage.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important notes above.
Remove the old xture from the ceiling, including the old mounting strap.
1.Fromthepartsbagremovethemountingstrapassembly.Oneendofnipple
(F)shouldbeattachedtomountingstrap(A)withhexnutandwasher(C&D)in
place.Theotherendshouldhavecanopyloop(H)attached.Attachmounting
strap(A)tothejunctionboxusingmountingscrews(B)andascrewdriver.
Tighten securely.
2.Unscrewcanopyloopcollar(I)fromcanopyloop(H).Passcanopy(G)over
themountedcanopylooptotesttheheight.Approximatelyhalfofthecanopy
loop’sexteriorthreadsshouldbeexposed,andthecanopyloopcollarshould
tsnuglyontothecanopyloop.Removecanopy(G)andadjusttheheightof
nipple(F)andcanopyloop(H)untilthedesiredheightisreached.Remove
canopy(G)andcanopyloop(H)andplaceaside.
A
B
F
K
H
G
D
K
I
J
C
E
L
M
N
O
P
O