Assembly Instructions: 2918-5
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important notes above.
Shut off the power at the circuit breaker and completely remove the old
xturefromtheceiling,includingtheoldmountingstrap.
1.Takethemountingstrapassemblyfromthepartsbag.Oneendofnipple(F)
shouldbeattachedtomountingstrap(A)withwasherandhexnut(CandD)
inplace.Canopyloop(H)isattachedtotheother.Securelyattachmounting
strap(A)tothejunctionboxusingmountingscrews(B)andascrewdriver.
2.Unscrewcanopyloopcollar(I)fromcanopyloop(H).Passcanopy(G)
overthemountedcanopylooptotesttheheight.Approximatelyhalfof
thecanopyloop’sexteriorthreadsshouldbeexposed,andthecanopy
loopcollarshouldtsnuglyontothecanopyloop.Removecanopy(G)and
adjusttheheightofnipple(F)andcanopyloop(H)untilthedesiredheightis
reached.
3.Centerrod(P)hasthexture’swiresinside.Centerrod(P)andspacer
(N)areonthexturewires,butnotattachedtothebodyofthexture.Pull
thewiresuntiltautthroughcenterrod(P)andthreadspacer(N)followedby
centerrod(P)ontothexturebodyatpost(O).
4.Bymeasuring,determinethecorrectnumberofchainlinksneededfor
properhangingheight.Ifnecessary,useapairofplierstoopenandremove
anyexcesschain.Attachonechainconnector(K)toeachendofchain(J).
Useoneofchainconnectors(K)toattachchain(J)totoploop(L)andclose
thechainconnector.Feedthexturewiresupthroughthechain(everythree
linksorso),pullingthewiresuntiltaut.Slidecanopyloopcollar(H)and
canopy(G)ontothechain/wire.Usethefreechainconnector(K)toattach
chain(J)tocanopyloop(H).
FINISHING THE INSTALLATION
6.Raisecanopy(G)uptotheceilingandslidecanopyloopcollar(I)upbeneaththecanopy.Tightlythreadcanopyloopcollar(I)onto
canopyloop(H)tosecurecanopy(G)inplace.
7.Slidecandlesleeves(S)oversockets(T).
Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.Donot
exceedthemaximumrecommendedwattage.
8.Haveanassistantholdframe(R)uparoundthexture.Clipdecorativechains(Q)intotheholesontopcap(M)andonframe(R).
Yourinstallationiscomplete.Turnonthepowerandtestthexture.
For Customer Service, please
contact the place of purchase.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
CONNECTING THE WIRES
5.Haveanassistantsupportthextureweightwhilecompletingthewiring.
Cutawayexcesswire.Attachthexture’swirestothepowersupplywires
fromthejunctionbox.Connectblacktoblack(orsmooth);whitetowhite
(orribbed);groundtoground(greenorcopper).Twisttheendsofthewire
pairstogether,thentwistonawireconnector.Makesurealltwistsarein
thesamedirection.Ifthereisnogroundwire(greenorcopper)fromthe
junctionbox,locategroundscrew(E)onmountingstrap(B)andwrapthe
xture’sgroundwirearoundthegreengroundscrew(E).Useascrewdriver
tosecuregroundscrew(E)ontothemountingbracket.Tuckallwiresneatly
intothejunctionbox.
A
B
C
D
E
F
G
H
I
J
K
L
P Q
M
S
T
N
O
R