Golden Lighting 7041-M1L BLK-CLR Operating instructions

Brand: Golden Lighting

Model: 7041-M1L BLK-CLR

Type: Operating instructions

Golden Lighting 7041-M1L BLK-CLR is a versatile and stylish lighting fixture that can elevate the ambiance of any room. With its adjustable height and chain length, it can be customized to fit various ceiling heights and lighting needs. The fixture's black finish and clear glass shade provide a classic and elegant look, making it suitable for both traditional and modern decors. The assembly process is straightforward, with clear instructions and all necessary hardware included.

Assembly Instructions: 7041-M1L (Monroe)

IMPORTANT:

• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the important notes above. Shut off the

poweratthecircuitbreakerandcompletelyremovetheoldxturefromtheceiling,including

theoldmountingstrap.

1.Fromthepartsbagremovethemountingstrapassembly.Oneendofnipple(F)shouldbe

attachedtomountingstrap(A)withwasherandhexnut(CandD)inplace.Theotherend

shouldhavecanopyloop(H)attached.Attachmountingstrap(A)tothejunctionboxusing

mountingscrews(B)andascrewdriver.Tightensecurely.

2. Unscrew canopy loop collar (I) from canopy loop (H). Pass canopy (G) over the mounted

canopylooptotesttheheight.Approximatelyhalfofthecanopyloop’sexteriorthreadsshould

be exposed, and the canopy loop collar should t snugly onto the canopy loop. Remove

canopy(G)andadjusttheheightofnipple(F)andcanopyloop(H)untilthedesiredheightis

reached.

ASSEMBLING THE FIXTURE

3.Decorativerod(N)isonthexture’swires,butnotattachedtothexture.Hookthebottom

of decorative rod (N) into top loop (L) and pull the wires until taut.

4. By measuring, determine the correct number of chain links needed for proper hanging

height.Ifnecessary,useapairofplierstoopenandremoveanyexcesschain.

5.Attachchainconnectors(K)toeachendofchain(J)beforeattachingoneendofthechain

connector/chain to the top of decorative rod (N). Close the chain connector. Connect the

other chain connector (K) to canopy loop (H).

6.Passthe xture’swiresupthroughchain(J) (everythreelinks orso). Slidecanopy loop

collar (I) and canopy (G) onto the chain/wire.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

For Customer Service, please

contact the place of purchase.

CONNECTING THE WIRES

7.Haveanassistantsupporttheweightofthexturewhilecompletingthewiring.Cutaway

excess wire. Threadthe xture’s wiresthrough canopyloop (H) andnipple (F). Attach the

xture’swirestothepowersupplywiresfromthejunctionbox.Connectblacktoblack(or

smooth);whitetowhite(orribbed);groundtoground(greenorcopper).Twisttheendsofthe

wirepairstogether,andthentwistonawireconnector.Makesurealltwistsareinthesame

direction.Ifthereisnogroundwire(greenorcopper)comingfromthejunctionbox,locate

groundscrew(E)onmountingstrap(A)andwrapthexture’sgroundwirearoundthegreen

groundscrew(E).Useascrewdrivertosecuregroundscrew(E)ontothemountingbracket.

Tuckallwiresneatlyintothejunctionbox.

FINISHING THE INSTALLATION

8.Pushcanopy(G)uptotheceilingand

slide canopy loop collar (I) up beneath

thecanopy.Tightlythreadcanopyloop

collar (I) onto canopy loop (H) to secure

canopy (G) in place.

House Wires

Fixture Wires

Hot

How to Identify the Fixture’s Wires

Hot Neutral Ground

Smooth

Ribbed

Bare Metal,

Green, or

Green Inner

Thread

Black

White

Black Inner

Thread

White Inner

Thread

9.Slideglassshade(P)oversocket(M)andsecureinplacewithsocketcover(O).

10.

Install a light bulb (not provided) in accordance with the xture’s specications. Do not exceed the maximum recommended

wattage.

Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.

Golden Lighting 7041-M1L BLK-CLR Operating instructions

Golden Lighting 7041-M1L BLK-CLR Operating instructions

Golden Lighting 7041-M1L BLK-CLR Operating instructions

Related papers

Other documents