Q-tran Q-TRAN Linear Fixture-Talo Sleek Flat Lens LED Aluminum Extrusion User manual

Brand: Q-tran

Model: Q-TRAN Linear Fixture-Talo Sleek Flat Lens LED Aluminum Extrusion

Type: User manual

The Q-tran Q-TRAN Linear Fixture-Talo Sleek Flat Lens LED Aluminum Extrusion offers versatile mounting options for various applications, including cove, under and over-cabinet, shelf, display cabinet, and signage. Ideal for a variety of settings such as offices, retail stores, hospitality venues, educational institutions, laboratories, and residential spaces, this fixture provides both style and functionality.

COMPLIANT 5YEAR

WARRANTY

INSTALLATION INSTRUCTIONS

LINEAR FIXTURE - TALO

TALO-FLAT (01) TALO-ENCAPSULATED (03)

INSTALLATION INSTRUCTIONS

LINEAR FIXTURE - TALO

ATTENTION: Please read all instructions BEFORE installation

• Product to be installed by a licensed electrician - Field modifications void warranty

• Use only with Class 2 power supply unit — Compatible for use with Q-Tran power supplies

• Surface mount

• Suitable for installation in storage area of a clothes closet when assembled as a finished fixture up to 4W/ft at Q-Tran facility

• Not rated for walkover

• Input Voltage: 24VDC

• Diagrams for representation only and not to scale

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

SURFACE MOUNTING METHOD

• VHB Adhesive Mount (page 5-6)

• Silicone Mount (page 7)

• Hidden Stainless Steel Clip Mount (page 8)

• Plastic T-BAR Clip Mount (page 9)

Cove, Under &

over cabinet:

Ideal for oce, retail,

hospitality, education,

laboratory, and

residential.

Shelf:

Ideal for oce, retail,

hospitality, education,

laboratory, and

residential.

Display cabinet:

Ideal for retail and

hospitality.

Signage:

Ideal for lobby, retail,

hospitality, institutional,

and transportation.

METHODS OF INSTALLATION

Hidden Stainless Steel Mount

Additional Mounting

(Sold separately)

WALL

VHB Tape

Sold separately

Plastic T-BAR-Clip

HINGE BRACKET

Q-ANGLE

Q-PIVOT

Adhesive Mount

Silicone

Sold separately

832

SST-02

PLC-01

.21

.625"

#4 x 5/8"

Flat Head SS

CONCRETE

FLOOR

Not rated for walkover

CEILING

1.38"

1.50"

2.23"

1.93"

WALL

HMB-L

1.46"

1.29"

HMB-XL 1.46"

4.00"

HMB-M

0.71"

1.41"

0.85"

1.03"

0.75"

.53”

.50”

.17”

1.00”

.50”

.10”

Standard 1"(15/16) grid clips

INSTALLATION INSTRUCTIONS

LINEAR FIXTURE - TALO

TALO-FLAT (01) TALO-ENCAPSULATED (03)

COMPONENTS &

HARDWARE MOUNTING

WIRING OPTIONS

.74"

.56

".57"

.19"

.74"

.56".57"

.19"

HIDDEN STAINLESS STEEL CLIP PLASTIC T-BAR CLIP

COMPONENTS & HARDWARE

SST-02 PLC-01

.21

.625"

Included

Flat Head

Screw

#4x5/8”

NOTES:

HIDDEN STAINLESS STEEL CLIP PLASTIC T-BAR CLIP

• 2 clips provided for 4’ or less; 4 clips provided for greater than 4’ • 2 Clips provided per first 12”, 1 clip provided per additional foot.

1.00”

.50”

.10”

.53”

.50”

.17”

Standard 1"(15/16) grid clips

ACCESSORIES SOLD SEPARATELY

HINGE BRACKET;

sold individually

Q-ANGLE;

sold in pairs

Q-PIVOT;

sold in pairs

HMB-M

HMB-L

HMB-XL Q-ANGLE Q-PIVOT

Included

• 4 SS #6x1.25”

Flat head wood screws

• 2 SS 4-40

Flat head clip screws

• 2 SS 6-32

Fillister screws

Included

• 3/4” long mount screw

• 1/4” #4 clip mount

screw

Included

• SS #4-40x3/16

Flat head screws

• 2 #4x3/4

Pan Head screws

Image shows

HMB-M

1.38"

1.50"

2.23"

1.93"

0.85"

1.03"

0.75"

SILICONE VHB TAPE; sold in 15’ increments

DOWSIL 832 TAPE-VHB-IP20

832

ADHESIVE SOLD SEPARATELY

METHODS &

INSTALLATIONS

INSTALLATION INSTRUCTIONS

LINEAR FIXTURE - TALO

Review wire method to ensure clean installation prior to mounting finished Fixture.

NOTE: Additional wire methods include:

S1 & S2: Connector/Wire Input only

P1 & P2: Connector/Wire Input and Output

COMPONENTS &

HARDWARE WIRING OPTIONS MOUNTING

METHODS &

INSTALLATIONS

CONTINUOUS WIRING CONFIGURATION OPTIONS

INSTALLATION INSTRUCTIONS

LINEAR FIXTURE - TALO

a. Using a 50/50 alcohol mix, thoroughly clean the backside

of the fixture and the surface area where fixture will

be installed. Allow 5 minutes to dry.

b. Peel back 0.5" of the VHB tape’s protective film on one

end and use firm pressure to adhere it to the desired

surface, avoiding air bubbles. Continue peeling the film

and adhering the tape in small sections until the entire

length is installed.

Temperature and environmental concerns:

• Ideal application environment is 70-100ºF in 50% humidity

or less.

• Minimum application temperature: 50ºF

• This temperature and humidity should be maintained for

72 hours after application for maximum bond strength.

For porous materials (Wood, Brick, Concrete etc.) apply two

layers of paint or primer to the surface. This will help create

a better bonding surface for these materials. These can be

purchased from a local hardware store.

Paint or

Primer 94

Wood Brick Concrete

1 layer 2 layers

50% humidity

or less

70-100ºF 72 hrs

50/50

alc

5 mins

50/50

alc

1 2

SURFACE MOUNTING METHOD

SURFACE PREPARATION

MATERIALSSUGGESTED EPOXIES

Concrete, Stone, Cinderblock,

Metal, and Brick

Loctite Metal and

Concrete Two-Part Epoxy

ABS, Fiberglass,

Plastic, and PVC

Loctite Plastic

Two-Part Epoxy

Tile, Wood, Ceramic,

Glass, or Metal

Loctite Clear

Two-Part Epoxy

All Purpose Strong Stik

COMPONENTS &

HARDWARE WIRING OPTIONS MOUNTING

METHODS &

INSTALLATIONS

INSTALLATION INSTRUCTIONS

LINEAR FIXTURE - TALO

a. To adhere the VHB adhesive, peel the white film back while

evenly applying the tape to the mounting side of the

fixture. The red side should be visible.

b. Remove the red film and position fixture in place

according to your previous reference marking(s).

Remove protective film from the surface of the fixture’s lens.

Determine the TALO fixture(s) location and positioning on

desired surface before adhering fixture to surface. Make any

necessary reference markings to indicate fixture placement.

Length as needed

SURFACE MOUNTING METHOD: VHB ADHESIVE

BEFORE installation, the surface must be thoroughly cleaned and dried for maximum bond strength. (Page 5)

Length as needed

NOTES: EPOXY ALTERNATIVE: For improved bonding strength, apply a small amount of epoxy at each end. Refer to table on for suggested

epoxies. These can be purchased at a local hardware store. Please follow all manufacturer instructions for suggested epoxy.

page 5

1 2

COMPONENTS &

HARDWARE WIRING OPTIONS MOUNTING

METHODS &

INSTALLATIONS

INSTALLATION INSTRUCTIONS

LINEAR FIXTURE - TALO

a. Firmly press the silicone-coated clips on the marked

reference points.

b. Wait for silicone adhesive to cure completely before

snapping fixture into place.

c. Snap fixture onto clips.

NOTE: Cure time is dependent on the type of silicone adhesive used.

Refer to silicone product manufacturer for accurate drying time.

Determine the TALO fixture(s) location and positioning on

desired surface; evenly distribute clips. Make any necessary

reference markings to indicate where each clip is to be

secured in place. Recommended every 24” - 30”.

Remove protective film from the surface of the fixture’s lens.

SURFACE MOUNTING METHOD: SILICONE

• 2 clips provided for 4’ or less; 4 clips provided for greater than 4’

24" - 30"

832

24" - 30"4" 4"

24" - 30"

1 2

COMPONENTS &

HARDWARE WIRING OPTIONS MOUNTING

METHODS &

INSTALLATIONS

INSTALLATION INSTRUCTIONS

LINEAR FIXTURE - TALO

a. Secure clips using the #4 flat head hardware provided.

b. Ensure the screw head is flush with the clip’s base.

c. Snap fixture onto clips.

NOTE: Flat head screw type is dependent on surface/application material.

Alternative flat head screws may be required. Refer to the surface material

manufacturer for suggested screw type.

Determine the TALO fixture(s) location and positioning on

desired surface; evenly distribute clips. Make any necessary

reference markings to indicate where each clip is to be

secured in place. Recommended every 24” - 30”.

Remove protective film from the surface of the fixture’s lens.

24" - 30"

SURFACE MOUNTING METHOD: HIDDEN STAINLESS STEEL CLIPS

• 2 clips provided for 4’ or less; 4 clips provided for greater than 4’

24" - 30"4" 4"

24" - 30"

1 2

COMPONENTS &

HARDWARE WIRING OPTIONS MOUNTING

METHODS &

INSTALLATIONS

INSTALLATION INSTRUCTIONS

LINEAR FIXTURE - TALO

Snap fixture onto T-BAR.

Determine the TALO fixture(s) location and positioning on

desired surface; evenly distribute clips. Make any necessary

reference markings to indicate where each clip is to be

secured in place. Recommended every 12”.

Remove protective film from the surface of the fixture’s lens.

12"

SURFACE MOUNTING METHOD: PLASTIC T-BAR CLIPS

• 2 Clips provided per first 12”, 1 clip provided per additional foot.

12"

Cip on the T-BAR clips

4” inward from each

end, and then 12”

apart for the full length

1 2

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS WIRING OPTIONS MOUNTING

Q-tran Q-TRAN Linear Fixture-Talo Sleek Flat Lens LED Aluminum Extrusion User manual

Q-tran Q-TRAN Linear Fixture-Talo Sleek Flat Lens LED Aluminum Extrusion User manual

Q-tran Q-TRAN Linear Fixture-Talo Sleek Flat Lens LED Aluminum Extrusion User manual

Related papers

Other documents