Q-tran Q-TRAN FXT-FLEXIBLE-BOXA Fully Encapsulated Flexible Fixture User manual

COMPLIANT

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

METHODS OF INSTALLATION

Mounting Clips & Channels

Seamless Mounting Channels

WALL

Q-ANGLE: (Sold separately)

FLOOR

Not rated for walkover

CEILING

WSC

RLC

SGC

WSC RLC

MC SGC

1.38"

1.50"

2.23"

1.93"

.37”

.81”

.75”

1.0”

.84”

1.0”

.51”

.27”

.12”

.77”

1.0”

1.40”

.85”

1.09

.86

2.0

1.09

" / FT

.86

1.09

" / FT

.86

.81

2.0

.86

.81"

96" / FT

.86

.81"

96" / FT

.86

.69"

2.0"

.69"

2.0"

.69"

96" / FT

.69"

96" / FT

.69"

96" / FT

.69"

96" / FT

PPS-2

PPS-96/FT

PPS-LP-2

PPS-LP-96/FT

PPS-2 PPS-96/FT

PPS-LP-2 PPS-LP-96/FT

White snug clip

2” PVC mount channel

2” PVC low proﬁle mount channel 96”/custom length PVC low proﬁle mount channel

96”/custom length PVC mount channel

Rigid lock channel

Magnetic clipSide graze channel

• WSC (page 6)

• RLC (page 7)

• SGC (page 8)

• MC (page 9)

• PPS-2 (page 10)

• PPS-LP-2 (page 11)

• PPS-96 & PPS-FT (page 12)

• PPS-LP-96 & PPS-LP-FT (page 13)

Cove, Under &

over cabinet:

Ideal for oce, retail,

hospitality, education,

laboratory, and

residential.

Shelf:

Ideal for oce, retail,

hospitality, education,

laboratory, and

residential.

Display cabinet:

Ideal for retail and

hospitality.

Signage:

Ideal for lobby, retail,

hospitality, institutional,

and transportation.

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

ATTENTION: Please read all instructions BEFORE installation

• Product to be installed by a licensed electrician - Field modifications void warranty

• Use only with Class 2 power supply unit — Compatible for use with Q-Tran power supplies

• Surface mount or recessed in millwork

• Not rated for walkover

• Input Voltage: 24VDC

• Diagrams for representation only and not to scale.

Mounting Method

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

COMPONENTS & HARDWARE

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

NOTES:

MOUNTING CLIP SEAMLESS CLIP

• White snug clip included with side graze channel • PPS-2 & PPS-LP-2 to join two fixtures together

• 2 white snug clips provided per first 12”, 1 for each additional 12”.

Other mounting styles incur additional charge, see price guide for details • PPS-96/FT & PPS-LP-96/FT to support the fixtures

• PPS-FT is to be cut at Q-Tran to requested length

BOXA Profile

.53"

.72"

MOUNTING CLIP & MOUNTING CHANNEL

WSC RLC MC SGC

Included

• #6 Flat Screw

(one provided for

each clip)

Included

• #6 Flat Screw

(one provided for

each clip)

Included

• #6 Flat Screw

(one provided for

each clip)

• 5/64 Allen key

• #8-32 Set Screw

Included

• #6 Flat Screw

(one provided for

each clip)

White snug clip Rigid lock channel Magnetic clip

(Cove use only) Side graze channel

.37”

.81”

.75”

.51”

.27”

.12”

.77”

1.0”

.84”

1.0”

1.40”

.85”

SEAMLESS MOUNTING CLIP & SEAMLESS MOUNTING CHANNEL

PPS-2 PPS-96 PPS-FT

Included

• #8 ﬂat head screw

(1 screw for every 16”)

• Built in wireway

Included

• #8 ﬂat head screw

(1 screw for every 16”)

• Built in wireway

• Custom length

Included

• #8 ﬂat head screw

(1 screw for every 16”)

• Built in wireway

Included

• #8 ﬂat head screw

(1 screw for every 16”)

• No wireway

PVC mounting clip PVC channelPVC channel

Low profile

PVC mounting clip

.69"

2.0"

1.09

.86"

2.0

1.09

" / FT

.86"

1.09

" / FT

.86"

.69"

96" / FT

.69"

96" / FT

.69"

2.0"

.81

2.0

.86

SEAMLESS MOUNTING CLIP & SEAMLESS MOUNTING CHANNEL

PPS-LP-2 PPS-LP-96 PPS-LP-FT

Included

• #8 ﬂat head screw

(1 screw for every 16”)

• No wireway

Included

• #8 ﬂat head screw

(1 screw for every 16”)

• No wireway

• Custom length

Q-ANGLE

Included

• 4 SS #6x1.25”

Flat head wood screws

• 2 SS 4-40

Flat head clip screws

• 2 SS 6-32

Fillister screws

ACCESSORIES SOLD SEPARATELY

Q-ANGLE; sold in pairs

1.38"

1.50"

2.23"

1.93"

Low profile

PVC channel Low profile

PVC channel

.81"

96" / FT

.86

.81"

96" / FT

.86

.69"

96" / FT

.69"

96" / FT

BOXA Profile

(Seamless BW)

.78"

.72"

BOXA Profile

(Seamless BRL)

.43"

.93"

.53"

BOXA Profile

(Seamless SW,

SW-HE, SC)

.78"

.72"

BOXA Profile

(Seamless DW,

DW-HE)

.78"

.72"

BOXA Profile

(Seamless RGB)

.90"

.72"

BOXA Profile

(Seamless RGBW)

.90"

.72"

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

CONTINUOUS WIRING CONFIGURATION OPTIONS

Review wire method to ensure clean installation prior to mounting finished fixture.

NOTE: Additional wire methods include:

S1, S2, S3, S4, S5: Connector/Wire Input only

P1, P2, P3, P4, P5: Connector/Wire Input and Output

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

BOXA

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

For porous materials (Wood, Brick, Concrete etc.) apply two

layers of paint or primer to the surface. This will help create

a better bonding surface for these materials.This can be

purchased from local hardware store.

Paint or

Primer 94

Wood Brick Concrete

1 layer 2 layers

Temperature and environmental concerns:

• Ideal application environment is 70-100ºF in 50% humidity

or less.

• Minimum application temperature: 50ºF

• This temperature and humidity should be maintained for

72 hours after application for maximum holding force.

50% humidity

or less

70-100ºF 72 hrs

MATERIALS SUGGESTED EPOXIES

Concrete, Stone, Cinderblock,

Metal, and Brick

Loctite Metal and

Concrete Two-Part Epoxy

ABS, Fiberglass,

Plastic, and PVC

Loctite Plastic

Two-Part Epoxy

Tile, Wood, Ceramic,

Glass, or Metal

Loctite Clear

Two-Part Epoxy

All Purpose Strong Stik

1 2

SURFACE MOUNTING METHOD

SURFACE PREPARATION

Using a 50/50 alcohol mix, thoroughly clean the backside of

the fixture and the surface area where fixture will be installed.

Allow 5 minutes to dry.

5 mins

50/50

alc

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

Determine the fixture(s) location and positioning on desired

surface; evenly distribute clips. Make any necessary

reference markings to indicate where each clip is to be

secured in place. Recommended every 12”.

• Secure clips using the #6 flat head hardware provided

• Ensure the screw head is flush with the clip’s base.

Snap fixture onto clips.

12"

1 2

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

SURFACE MOUNTING METHOD: WHITE SNUG CLIP

12"

NOTE: Flat head screw type is dependent on surface/application material

Alternative flat head screws may be required. Refer to the surface material

manufacturer for suggested screw type.

• 2 clips provided per first 12”, 1 for each additional 12”

.28"

.63"

#6x5/8" Flat head screw

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

Tighten set screw to lock fixture in channel for extra security.

1 2

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

a. Push retainer clip onto fixture.

b. Push fixture with retainer clip into Rigid Lock Channel.

SURFACE MOUNTING METHOD: RIGID LOCK CHANNEL

• 2 channels provided per first 12”, 1 for each additional 12”

12"

Determine the fixture(s) location and positioning on desired

surface; evenly distribute channels. Make any necessary

reference markings to indicate where each channel is to be

secured in place. Recommended every 12”.

#8-32 Set screw

5/64 Allen key

12"

.28"

.63"

#6x5/8" Flat head screw

b.a.

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

12"

1 2

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

SURFACE MOUNTING METHOD: SIDE GRAZE CHANNEL

• 2 channels provided per first 12”, 1 for each additional 12”

12"

Determine the fixture(s) location and positioning on desired

surface; evenly distribute channels. Make any necessary

reference markings to indicate where each channels is to be

secured in place. Recommended every 12”.

.28"

.63"

#6x5/8" Flat head screw

#6x0.25" Flat countersunk

trim head tapping screw

• Secure clips using the #6 flat head hardware provided

• Ensure the screw head is flush with the channel’s base.

NOTE: Flat head screw type is dependent on surface/application material

Alternative flat head screws may be required. Refer to the surface material

manufacturer for suggested screw type.

Snap fixture onto channels.

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

12"

.28"

.63"

#6x5/8" Flat head screw

Attach clips to fixture matching magnet distances.

NOTE: Flat head screw type is dependent on surface/application material.

Alternative flat head screws may be required. Refer to the surface material

manufacturer for suggested screw type.

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

Determine the fixture(s) location and positioning on desired

surface; evenly distribute clips. Make any necessary

reference markings to indicate where each clip is to be

secured in place. Recommended every 12”.

MOUNTING METHOD: MAGNETIC CLIP

• 2 clips provided per first 12”, 1 for each additional 12”

Align and snap fixture to magnetic rings.

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

Power Supply

Finished assembly for seamless feed mounting

1 2

SEAMLESS MOUNTING METHOD: PPS-2

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

Press both fixtures into PPS channel. Snap fixture into mounted PPS channel when wire will exit into

conduit do not install bracket.

• Connects two seamless fixtures, with or without wire exit

• 2” PVC mount channel

• Built in wireway

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

Power Supply

Finished assembly for end feed mounting

1 2

SEAMLESS MOUNTING METHOD: PPS-LP-2

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

Snap in 2” channel. Press fixture into mounted PPS channel.

• Connects two fixtures, with no wire exit

• 2” low profile PVC mount channel

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

1 2

16" 16" 16"

SEAMLESS MOUNTING METHOD: PPS-96 / PPS-FT

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

The PPS-BRACKET can be field cuttable and cut to whatever

length your application requires. The PPS-BRACKET can be

installed as a full length of 96”, multiple smaller pieces, or

end to end for longer seamless runs.

Using pre-drilled pilot holes screw the #8 flat head screws to

mount the PPS-BRACKET (1 screw every 16”).

NOTE: For drywall applications mount directly into a stud.

To mount, pinch the upper half of the PPS-96 or PPS-FT

while you pivot it around one side of the PPS-BRACKET and

push-in until you hear it snap into place. The PPS-96 or

PPS-FT flexes around the PPS-BRACKET to create a solid,

and secure snap on connection.

Using pre-drilled pilot holes, use the #8 flat head screws to

mount the PPS-BRACKET.

• Support two seamless fixtures, with or without wire exit

• 96” (PPS-96) or custom length (PPS-FT)

• Built in wireway

#8 Flat head screw

.31

1.75"

.17

.69

PPS - BRACKET:

Sold in full length of 96"

or custom length (FT)

MILLWORK

.86"

.95"

1.09"

Cut out area

Millwork install

The PPS-BRACKET

allows you to create

a wire way under the

PPS channel

without any screws

interfering

Built in wireway:

2" or more

INSTALLATION INSTRUCTIONS

FLEXIBLE FIXTURES - BOXA

1 2

16" 16" 16"

SEAMLESS MOUNTING METHOD: PPS-LP-96 / PPS-LP-FT

COMPONENTS &

HARDWARE

METHODS &

INSTALLATIONS MOUNTING

WIRING OPTIONS

The PPS-BRACKET can be field cuttable and cut to whatever

length your application requires. The PPS-BRACKET can be

installed as a full length of 96”, multiple smaller pieces, or

end to end for longer seamless runs.

Using pre-drilled pilot holes screw the #8 flat head screws to

mount the PPS-BRACKET (1 screw every 16”).

NOTE: For drywall applications mount directly into a stud.

To mount, pinch the upper half of the PPS-LP-96 or

PPS-LP-FT while you pivot it around one side of the

PPS-BRACKET and push-in until you hear it snap into

place. The PPS-LP-96 or PPS-LP-FT flexes around the

PPS-BRACKET to create a solid, and secure snap on

connection.

Using pre-drilled pilot holes, use the #8 flat head screws to

mount the PPS-BRACKET.

• Support two fixtures, without built-in wireway

• 96” (PPS-LP-96) or custom length (PPS-LP-FT)low profile

PVC mount channel

#8 Flat head screw

.31

1.75"

.17

.69

PPS - BRACKET:

Sold in full length of 96"

or custom length (FT)

2" or more

.86"

.81"

MILLWORK

.95"

Cut out area

Millwork install

No Bracket: With Bracket:

Q-tran Q-TRAN FXT-FLEXIBLE-BOXA Fully Encapsulated Flexible Fixture User manual

Related papers

Other documents