2. TRAN LED
  3. 24/6.0 Strip

TRAN LED 24/6.0 Strip User manual

  • Hello, I've reviewed the specification document for the Q-Tran Warm Dim WD24/6.0 LED strip and the TORQ extrusion. This document outlines the steps for building a custom LED fixture, including details on cut points, compatible extrusions, various connector options, and information on lumen multipliers. I'm ready to answer any questions you may have about these products.
  • What is the recommended cut point for the LED strip?
    What is the maximum length of the LED strip?
    What lens options are available for the extrusion?
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-03-23-22
WD24/6.0 STRIP: Warm Dim
BUILDING A FIXTURE
Fill out the ordering code on the STRIP cutsheet, choosing "MATCH" for ILLUMINATED LENGTH (in).
Fill out the ordering code for the EXTRUSION cutsheet and choose a non-encapsulated lens (Clear, Frosted, Polar, or Diffused).
1
2
The strip you just created will now be fitted and installed into an extrusion. The strip and extrusion will not be equal in length; the strip will stop just short of the extrusion's endcaps.
WD24/6.0
V/Watts
19/30
CCT - Lumens/CRI
MATCH
Illuminated Length (in)Rated
DRY
Connector/
WireIn
BW
Connector/
WireOut
CLS
Wire Color
WH
Wire Type
CL2
TORQ
Product Mounting
12"
Finished Fixture Length (in)Finish
ST
Lens
CLSST
Type
S1
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-03-23-22
WD24/6.0 STRIP: Warm Dim
.39"
.05"
DRY
- 2" Cutpoints
- Field Cuttable
- Lengths up to 192"
RATED
WET
- Enclosed in silicone sleeving
- 2" Cutpoints
- Lengths up to 192"
COMPATIBLE EXTRUSIONS
FLUR
ARKA
TELA
VEVE
TAL
O
 
LALO
WIDE
TRE3
TORQ
SLIM
with no lens
ROND
MDIN
EMBD
OPTI
COMPATIBLE EXTRUSIONS
FLUR
ARKA
TELA
VEVE TAL
O
 
LALO
WIDE
TRE3
TORQ
SLIM
ROND
MDIN
OPTI
LATO
EMBD
.47"
.18"
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-03-23-22
WD24/6.0 STRIP: Warm Dim - Connectors/Wire
.35"
.42" .45" .66"
DRY BARREL
- 22 AWG
- Dry rated
- 6" Standard length
WET BARREL
- 22 AWG
- Wet rated
- 6" Standard length
BRLBRL
BW
MALE
INPUT CONNECTOR
MALE
INPUT CONNECTOR
FEMALE
OUTPUT CONNECTOR
FEMALE
OUTPUT CONNECTOR
CONNECTORS/WIRE
BARE WIRE
- 22 AWG
- Indoor/Outdoor rated
- 24" Standard length
CONNECTOR 6"
- 22 AWG
- Indoor rated
- 6" Standard length
CONNECTOR 24"
- 22 AWG
- Indoor rated
- 24" Standard length
CON6 CON24
.38"
.18
"
.38"
.18"
.39"
.18"
.39"
.18"
.15" Indoor
.11" Outdoor
.15"
.11"
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-03-23-22
NOTES:
• Data subject to change, all data has +/- 5% tolerance
WD24/6.0 STRIP: Warm Dim - Lumen Multiplier
Lumen Multiplier Formula
Satin finish Black finish Bronze finish
Finish
ST BK BZ
Diode free or near Diode free
Lens CL
Clear FR
Frosted PR
Polar DF
Diffused
ENC/CL
Encapsulated in Clear ENC/TL
Encapsulated in Translucent
SLIM WIDE ROND
Satin Black Bronze Satin Black Bronze Satin Black Bronze
(ST) (BK) (BZ) (ST) (BK) (BZ) (ST) (BK) (BZ)
CL 0.90 0.87 0.87 CL 0.90 0.81 N/A CL 0.83 ** N/A
DF 0.75 0.64 0.64 FR 0.87 0.79 N/A FR 0.81 ** N/A
PR 0.84 0.74 N/A PR 0.77 ** N/A
DF 0.76 0.63 N/A DF 0.71 ** N/A
ARKA TORQ TRE3
Satin Black Bronze Satin Black Bronze Satin Black Bronze
(ST) (BK) (BZ) (ST) (BK) (BZ) (ST) (BK) (BZ)
CL 0.95 0.90 0.90 CL 0.76 0.63 0.63 DF 0.76 N/A N/A
FR 0.93 0.89 0.89 FR 0.74 0.61 0.61
PR 0.86 0.81 0.81 PR 0.64 0.51 0.51
DF 0.79 0.70 0.70 DF 0.57 0.41 0.41
ENC/CL 0.64 0.36 0.36
ENC/TL 0.53 0.26 0.26
FLUR TELA VEVE
Satin Black Bronze Satin Black Bronze Satin Black Bronze
(ST) (BK) (BZ) (ST) (BK) (BZ) (ST) (BK) (BZ)
CL 0.68 0.55 N/A FR 0.89 0.86 0.86 CL 0.83 0.71 N/A
FR 0.66 0.51 N/A PR 0.83 0.79 0.79 FR 0.82 0.71 N/A
PR 0.54 0.38 N/A DF 0.79 0.72 0.72 PR 0.76 0.63 N/A
DF 0.45 0.28 N/A DF 0.64 0.50 N/A
ENC/CL 0.54 0.30 N/A
ENC/TL 0.34 0.16 N/A
TALO LATO MDIN-S
Satin Black Bronze Satin Black Bronze Satin Black Bronze
(ST) (BK) (BZ) (ST) (BK) (BZ) (ST) (BK) (BZ)
CL 0.84 0.71 N/A CL 0.83 0.70 0.70 DF 0.51 N/A N/A
FR 0.83 0.70 N/A FR 0.83 0.70 0.70
PR 0.77 0.64 N/A PR 0.77 0.63 0.63
DF 0.70 0.54 N/A DF 0.66 0.51 0.51
ENC/CL 0.72 0.46 N/A ENC/CL 0.73 0.48 0.48
ENC/TL 0.36 0.20 N/A ENC/TL 0.47 0.27 0.27
LALO
Satin Black Bronze
(ST) (BK) (BZ)
CL 0.83 0.71 N/A
FR 0.83 0.70 N/A
PR 0.78 0.63 N/A
DF 0.70 0.53 N/A
ENC/CL 0.73 0.47 N/A
ENC/TL 0.39 0.20 N/A
Finish
Finish
Finish
Finish
Finish
Lens
Finish
Finish
Lens Lens
Lens
Lens
Finish
Finish
Lens
LensLens
Lens
Finish
Lens
Finish
Lens
Finish
Lens
Lens
Finish
.27"
.74"
.58"
1.98"
.62"
.48"
.41"
.70"
.60"
.24"
.71"
.71"
.75"
.70"
.63"
.63"
.63"
.63"
.61"
.70"
.90"
.34"
.74"
.
56"
.70"
.
42"
Bare LED Lumens x Extrusion Finish/Lens Value
Example:
WD24/6.0 at 3000K x TORQ Extrusion in Satin with FR Lens
527 lm/ft 0.74x= 389.98 lm/ft
/