2. Super Bright LEDS
  3. LHBDS1
LHBDS1

Super Bright LEDS LHBDS1, LS-LHBV2 Series User manual

  • Hello! I have reviewed the user manual for the superbrightleds LS-LHBV2 series LED Linear High Bay Light, which includes the LS-LHBV2-165WBFP2C1-WH50 model, along with pendant mount and wire guard accessories. The manual provides important safety instructions, wiring diagrams, and detailed installation steps, including suspension chain mounting, pole mounting, and wire guard attachment. I'm ready to assist with any questions you might have about these products and their installation.
  • Who should install this product?
    What should be done before installation?
    What is important about the mounts?
LED Linear High Bay Light
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 12/08/2021
Safety and Notes
• Product should be installed and serviced by a certied electrician
in accordance with applicable national, state, and local building and
electrical codes.
• To reduce the risk of electric shock, ensure that the main power source
and circuit breakers are switched o before performing any installation
or wiring procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached and will support the weight
of the xture. Failure to properly support xture may result in damage
or injury, for which the manufacturer does not assume responsibility.
Important: Read all instructions prior to installation. LS-LHBV2 Series
User Manual
LS-LHBV2-165WBFP2C1-WH50
Suspension Chain Installation
1. Switch o supply power.
2. Measure and attach chains to a pipe or mounting hooks (not included)
that can support weight of the xture.
3. Attach hangers to light and hang light on chains. Adjust height as needed.
4. Connect wiring and conduit to xture.
5. Switch on supply power.
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
Wiring Diagram
Line
Neutral
Ground
Black
L L
N N
GND GND
White
Dim (+)
Dim (-)
Purple
+ +
- -
Gray
Green
Line
Neutral
Ground
Black
L L
N N
GND GND
White
Dim (+)
Dim (-)
Purple
+ +
- -
Gray
Green
120–277 VAC Input 1–10 V Dimming
5yr
LED Linear High Bay Light
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 12/08/2021
Optional Accessories
Optional Pole/Pendant Mounting Installation
1. Switch o supply power.
2. Attach pole/pendant mounting bracket to rigid conduit.
3. Connect wiring and attach light to bracket.
4. Switch on supply power.
Accessory Type Part Number Compatible Lights
pendant mount LHBDS1-C1 LHBDS1-50K90FL-P2WH2, LHBDS1-50K110ML-P2WH2, LHBDS1-50K135FL-P2WH2,
LHBDS1-50K165ML-P2WH2, and LHBDS1-50K220ML-P2WH2
LHBDS1-C2 LHBDS1-50K220FL-P2WH3, LHBDS1-50K300ML-P2WH3
wire guard
LHBDS1-WG1 LHBDS1-50K90FL-P2WH2, LHBDS1-50K110ML-P2WH2, LHBDS1-50K135FL-P2WH2,
LHBDS1-50K165ML-P2WH2
LHBDS1-WG2 LHBDS1-50K220ML-P2WH2
LHBDS1-WG3 LHBDS1-50K220FL-P2WH3, LHBDS1-50K300ML-P2WH3
Important: Read all instructions prior to installation. LS-LHBV2 Series
User Manual
Optional Wire Guard Installation
1. Remove supply power if light is already installed.
2. Place wire guard over light and attach using provided hardware.
5yr
/