Super Bright LEDS RCW-RFRGB User manual

Super Bright LEDS
Brand
Super Bright LEDS
Model
RCW-RFRGB
Type
User manual

Super Bright LEDS RCW-RFRGB is a wireless waterproof remote RGB LED controller that allows you to control RGB LED strips with ease. With its compact size and easy-to-use interface, this controller is perfect for a variety of applications, including home lighting, automotive lighting, and commercial lighting.

The RCW-RFRGB comes with a key fob remote that gives you complete control over your RGB LED strips. You can use the remote to turn the lights on or off, change the color, adjust the brightness, and select from a variety of dynamic modes. The controller also features an override mode that allows you to temporarily override the current mode and set the lights to a solid color.

Super Bright LEDS RCW-RFRGB is a wireless waterproof remote RGB LED controller that allows you to control RGB LED strips with ease. With its compact size and easy-to-use interface, this controller is perfect for a variety of applications, including home lighting, automotive lighting, and commercial lighting.

The RCW-RFRGB comes with a key fob remote that gives you complete control over your RGB LED strips. You can use the remote to turn the lights on or off, change the color, adjust the brightness, and select from a variety of dynamic modes. The controller also features an override mode that allows you to temporarily override the current mode and set the lights to a solid color.

Wireless Waterproof Remote RGB LED Controller
RGB LED Controller, On/Off, Color and Dynamic Modes
WIFI-CON
User Manual
Part Number:
Important: Read all instructions prior to installation. RCW-RFRGB
Remote: RCW-RFR
Parts Included
Diagram 1
Diagram 2
Remote Buttons
1 - RF Controller
1 - Key Fob Remote
Remote comes paired to the controller. Use the following Procedure if additional
remotes are required.On power up, LEDs will be green indicating pairing mode for three
seconds. During green pairing mode, press button “A” then “B” to pair a new remote.
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Specications
Wiring
Remote Pairing
Model Number RCW-RFRGB
Input Voltage 9~14.5 VDC
Output Current 3 x 1.3A Maximum
Fuse Size 3A
Operating Temperature -4 ~149° F (-20~65° C)
IP Rating Waterproof IP67
Static Color Dynamic Modes 2
Seven Color Dynamic Modes 2
Static Colors 18
Override Mode 1
Brightness Levels 5
Remote Battery 12V 27A x 1
Remote Range 33 Feet (10m) Maximum
Remote Frequency 315 MHz
FCC ID 2AFXS-JX-R001
Button Functions
Cycles up through 18 single color modes and two 7 color modes.
Press and hold for dimming 80%, 60%, 40%, 20% and back to
100% during single color modes.
Activates Flash Modes during single color modes. Switches
between Flash/Flash/Long Pause and Flash/Flash/Short Pause
during ash modes. Increases cycle speed during 7 color modes
Activates Fading Mode during single color modes. Decreases
cycle speed during 7 color modes.
On/Off
Hold for 6 seconds to return to Mode 1 (Static Red)
Output Connector Polarity Purpose
Black Positive (+) Common Anode (+)
Red Negative (-) Red Cathode (-)
Green Negative (-) Green Cathode (-)
Blue Negative (-) Blue Cathode (-)
Input Wires Polarity Purpose
Black Negative (-) Ground In (-)
Red Positive (+) 9~14.5 VDC Power In (+)
Blue* Positive (+) 9~14.5 VDC Red Override Signal In (+)
*Blue wire activates red single color mode at full brightness while voltage is applied. Use for
brake override if required. Works as brake override even when controller is in standby mode.
Fuse Panel
MFCT: Mini Fuse
Circuit Tap
(not included)
Ground (-)
White
Antenna
Black
Ground
Red
Power In
Blue
Brake
Override
To Brake
Switch
RGB LED Strip
(not included)
LC4 Connector
RF Controller
RCW-RFRGB
RCW-RFRGB
Black
Ground
Red
Power In
Blue
Wire
RGB LED Strip
(not included)
LC4 Connector
RF Controller
Running Light Cicuit (+)
Ground
G
R
B
G
R
B
G
R
B
G
R
B
White
Antenna
PSC-164
Brake Light
Circuit (+)
G
R
B
G
R
B
G
R
B
G
R
B
1 - Inline Fuse Holder
1 - 3A Fuse
RCW-RFRGB
WIFI-CON
User Manual
Part Number:
Important: Read all instructions prior to installation.
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Mode Sequence & Functions
Mode Button A Button B Button C Button D
1 Red Flash Modes Fade Mode On/Off
2 Blue Flash Modes Fade Mode On/Off
3 Light Pink Flash Modes Fade Mode On/Off
4 Green Flash Modes Fade Mode On/Off
5 Gold Flash Modes Fade Mode On/Off
6 Light Blue Flash Modes Fade Mode On/Off
7 Orange Flash Modes Fade Mode On/Off
8 Hot Pink Flash Modes Fade Mode On/Off
9 Light Green Flash Modes Fade Mode On/Off
10 Cool White Flash Modes Fade Mode On/Off
11 Aqua Flash Modes Fade Mode On/Off
12 Pale Rose Flash Modes Fade Mode On/Off
13 Purple Flash Modes Fade Mode On/Off
14 White Flash Modes Fade Mode On/Off
15 Warm White Flash Modes Fade Mode On/Off
16 Sky Blue Flash Modes Fade Mode On/Off
17 Sea Green Flash Modes Fade Mode On/Off
18 Lemon Flash Modes Fade Mode On/Off
19 7 Color Flash Speed Up Speed Down On/Off
20 7 Color Fade Speed Up Speed Down On/Off
RCW-RFRGB
Remote: RCW-RFR
FCC Statement
Auxilary Running/Brake Light Example
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications in construction of this device which are not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Tip: To use RGB LED light strips for auxilary
running lights/brake lights, set controller for
red color and dim to desired brightness. Attach
Blue wire from controller to the positive brake
light wire on the motorcycle. After pairing
mode the LED light strips will be dim red when
controller is on and the LED light strips will
be full brightness red when brake is applied.
Controller will activate full brightness red
mode anytime the controller is powered and a
positive signal is applied to the blue wire.
White
Antenna
Black
Ground
Red
Power In
Blue
Brake
Override
To Brake
Switch
RGB LED Strip
(not included)
LC4 Connector
RF Controller
RCW-RFRGB
RCW-RFRGB
Black
Ground
Red
Power In
Blue
Wire
RGB LED Strip
(not included)
LC4 Connector
RF Controller
Running Light Cicuit (+)
Ground
G
R
B
G
R
B
G
R
B
G
R
B
White
Antenna
PSC-164
Brake Light
Circuit (+)
G
R
B
G
R
B
G
R
B
G
R
B
  • Page 1 1
  • Page 2 2

Super Bright LEDS RCW-RFRGB User manual

Super Bright LEDS
Brand
Super Bright LEDS
Model
RCW-RFRGB
Type
User manual

Super Bright LEDS RCW-RFRGB is a wireless waterproof remote RGB LED controller that allows you to control RGB LED strips with ease. With its compact size and easy-to-use interface, this controller is perfect for a variety of applications, including home lighting, automotive lighting, and commercial lighting.

The RCW-RFRGB comes with a key fob remote that gives you complete control over your RGB LED strips. You can use the remote to turn the lights on or off, change the color, adjust the brightness, and select from a variety of dynamic modes. The controller also features an override mode that allows you to temporarily override the current mode and set the lights to a solid color.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents