2. super bright LED
  3. UHBD-S1
UHBD-S1

super bright LED UHBD-S1 User manual

  • Hello! I've reviewed the user manual for the Super Bright LEDs UHBD-S1 series High Bay Lights, including models UHBD-S1-50K100-80H, UHBD-S1-xKx-80H, UHBD-S1-PRx and UHBD-S1-WGx. This manual provides installation instructions, safety guidelines, and technical specs. I'm ready to assist with your questions regarding these lights, their installation, or features like IP65 rating and 0-10V dimming.
  • What is included in the package?
    What is the environmental rating of this light?
    What is the operating temperature range?
    What is the dimming type?
LED UFO High Bay Light
Important: Read all instructions prior to installation. UHBD-S1 Series
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V2 01/17/2022
Included Parts
Wiring Diagram
Safety and Notes
Specications
Installation
User Manual
Black
L L
N N
GND GND
White
Green
+ +
– –
Purple
Gray
Black
White
Green
Purple
Gray
Black
L L
N N
GND GND
White
Green
+ +
– –
Purple
Gray
Black
White
Green
Purple
Gray
UHBD-S1-50K100-80H
1 - high bay light
1 - hook
1. Insert hook into threaded hole on top of xture and tighten.
2. With supply power switched o, connect wiring.
3. Hang xture by attaching hook to an existing chain
or carabiner (SBL number HBU-CARB or SC-300).
• Product should be installed by a certied electrician in accordance
with applicable national, state, and local building and electrical
codes.
• To reduce the risk of electric shock, ensure that the main power
source and circuit breakers are switched o before performing
any installation or wiring procedures.
• Avoid looking directly into the lamp when illuminated.
• Ensure all mounts are securely attached and will support the
weight of the xture. Failure to properly support the xture may
result in damage or injury, for which the manufacturer does not
assume responsibility.
Model UHBD-S1-xKx-80H
Operating Temperature -40°–113° F(-40°–45° C)
Environmental Rating IP65, wet locations
Dimming 0–10 V
5yr
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
100–277 VAC Input 0–10 V Dimming
screw
LED UFO High Bay Light
Important: Read all instructions prior to installation. UHBD-S1 Series
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V2 01/17/2022
Reectors and Guards
User Manual
UHBD-S1-PRx UHBD-S1-WGx
Optional reectors and guards can be installed by attaching the accessory to the
existing, unused screw holes in the light housing using the screws provided with
the accessory guard or reector.
5yr
/