Super Bright LEDS LS-LHBV2 Series User manual

LS-LHBV2 Series
Super Bright LEDS
Brand
Super Bright LEDS
Model
LS-LHBV2 Series
Type
User manual

This manual is also suitable for

LED Linear High Bay Light
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 12/08/2021
Safety and Notes
• Product should be installed and serviced by a certied electrician
in accordance with applicable national, state, and local building and
electrical codes.
• To reduce the risk of electric shock, ensure that the main power source
and circuit breakers are switched o before performing any installation
or wiring procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached and will support the weight
of the xture. Failure to properly support xture may result in damage
or injury, for which the manufacturer does not assume responsibility.
Important: Read all instructions prior to installation. LS-LHBV2 Series
User Manual
LS-LHBV2-165WBFP2C1-WH50
Suspension Chain Installation
1. Switch o supply power.
2. Measure and attach chains to a pipe or mounting hooks (not included)
that can support weight of the xture.
3. Attach hangers to light and hang light on chains. Adjust height as needed.
4. Connect wiring and conduit to xture.
5. Switch on supply power.
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
Wiring Diagram
Line
Neutral
Ground
Black
L L
N N
GND GND
White
Dim (+)
Dim (-)
Purple
+ +
- -
Gray
Green
Line
Neutral
Ground
Black
L L
N N
GND GND
White
Dim (+)
Dim (-)
Purple
+ +
- -
Gray
Green
120–277 VAC Input 1–10 V Dimming
5yr
LED Linear High Bay Light
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 12/08/2021
Optional Accessories
Optional Pole/Pendant Mounting Installation
1. Switch o supply power.
2. Attach pole/pendant mounting bracket to rigid conduit.
3. Connect wiring and attach light to bracket.
4. Switch on supply power.
Accessory Type Part Number Compatible Lights
pendant mount LHBDS1-C1 LHBDS1-50K90FL-P2WH2, LHBDS1-50K110ML-P2WH2, LHBDS1-50K135FL-P2WH2,
LHBDS1-50K165ML-P2WH2, and LHBDS1-50K220ML-P2WH2
LHBDS1-C2 LHBDS1-50K220FL-P2WH3, LHBDS1-50K300ML-P2WH3
wire guard
LHBDS1-WG1 LHBDS1-50K90FL-P2WH2, LHBDS1-50K110ML-P2WH2, LHBDS1-50K135FL-P2WH2,
LHBDS1-50K165ML-P2WH2
LHBDS1-WG2 LHBDS1-50K220ML-P2WH2
LHBDS1-WG3 LHBDS1-50K220FL-P2WH3, LHBDS1-50K300ML-P2WH3
Important: Read all instructions prior to installation. LS-LHBV2 Series
User Manual
Optional Wire Guard Installation
1. Remove supply power if light is already installed.
2. Place wire guard over light and attach using provided hardware.
5yr
  • Page 1 1
  • Page 2 2

Super Bright LEDS LS-LHBV2 Series User manual

LS-LHBV2 Series
Super Bright LEDS
Brand
Super Bright LEDS
Model
LS-LHBV2 Series
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents