2. Right Weigh
  3. 201-EBT-10B
201-EBT-10B

Right Weigh 201-EBT-10B Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Right Weigh 201-EBT-10B Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION OVERVIEW
201-EBT-10B
WHAT’S INCLUDED
This installaon overview is not a substute for reading the product manuals
APPLICATIONS
Single Axle Trailer Single Point Trailer Axle
Sensor Locaon: Sensor Locaon:
Mode:
The strain sensor should be located on
the top, center of the axle. See 218-SK
manual for more informaon on how to
install the sensor.
The strain sensor should be located on the
top, center of the trunnion tube. See
218-SK manual for more informaon on
how to install the sensor.
Set the gauge to average mode (AVG) - gives average weight of all axles on axle group. See Spring Suspension Gauge manual for informaon on
how to set the mode.
PP-003-0051-AU REV B
A
Straight Truck with Trunnion Tube
Sensor Locaon:
The strain sensor should be located on the
top, center of the trunnion tube. See
218-SK manual for more informaon on
how to install the sensor.
CONTACT US!
Smart Truck Soluons
+61 418 622840
rightweigh.com.au
[email protected]
Follow Us!
AA
1 x 201-217-10 - Gauge and mounng bracket
1 x 218-SK - Weld strain sensor installaon kit
SENSOR CONFIGURATION
The gauge should be set to detect 1 Spring Sensor. See Spring Suspension
Gauge manual for more informaon on how to set the sensor configuraon.
www.rwls.com
ON/OFF
HOLD 3 SECONDS
CALIBRATE
C
HIGH
1C
LOW
234
ENTER
MENU
i
EL-003-0004
1 2 3 4 C/H C/L - KG LBS
Scan here to see addional resources on our
website including full installaon manuals,
quick set up guides, and video tutorials!
/